Abracon - AFBC-Q0805H-601-T

FERRITE CHIP; Construction: Chip Bead; Maximum DC Resistance: .15 ohm; Maximum Frequency: 100 MHz; Material: Ferrite; Rated Current: 1 A;

Bourns EMI103T-RC is a 3-terminal data line filter with 10,000 Mohm insulation resistance and 50V rated voltage. It offers 25dB attenuation at max frequency of 15MHz, making it ideal for noise suppression in electronic circuits. With dimensions of L9.0xB3.2xH8.0 mm, this through-hole mount filter has a rated current of 5A and capacitance of 10,000uF.

Murata Manufacturing's BLM18PG121SN1B is a chip bead data line filter with 2 terminals, operating b/w -55 to 125 °C. It offers a DC resistance of 0.05 ohm, output impedance of 120 OHM, and rated current of 2 A. Ideal for applications requiring noise suppression in circuits up to 100 MHz frequency range.

Traco Electronic Ag's TCK-050 is a Data Line Filter with 2 functions, inductance of 325uH, and max DC resistance of 0.035 ohm. It is used for noise suppression in data lines, measuring L11.0xB11.0xH8.8mm and rated for 3.3A current flow through THROUGH HOLE MOUNT installation.

The TDK MMZ2012Y102BTD25 is a chip bead data line filter with AEC-Q200 screening. Featuring FERRITE CHIP technology, it has a max operating temp of 125°C and min of -55°C. With dimensions of L2.0xB1.25xH0.85 (mm), it's ideal for automotive applications requiring a rated current of 0.5A and output impedance of 1000Ω.

Murata Manufacturing's BLM18PG471SZ1D is a FERRITE CHIP filter with 470 OHM output impedance, suitable for data line filtering applications. With AEC-Q200 screening and 1A rated current, it operates b/w -55 to 125 °C, making it ideal for automotive electronics. This surface mount chip has 2 terminals, measures 1.6mm in length and 0.8mm in width, with a max DC resistance of 0.2 ohm.

Murata Manufacturing's BLM18BD182SN1D is a chip bead data line filter with 2 terminals, rated current of 0.05A, and output impedance of 1800 ohm. It operates b/w -55 to 125 °C and has dimensions of L1.6XB0.8XH0.8 (mm). Ideal for surface mount applications in filtering frequencies from 100 MHz with max DC resistance of 1.5 ohm.

Murata Manufacturing's NFW31SP106X1E4L is a 3-terminal data line filter with 30 dB attenuation at 1000 MHz. It operates b/w -40 to 85 °C and has a rated voltage of 25 V, making it ideal for high-frequency noise suppression in electronic devices. With dimensions of L3.2XB1.6XH1.8 mm, this surface mount filter offers max insertion loss of 30 dB and is suitable for tape and reel packaging applications.

FERRITE CHIP; Construction: Chip Bead; Maximum DC Resistance: .3 ohm; Material: Ferrite; Rated Current: .5 A; Dimensions: L3.2XB1.6XH1.1 (mm)/L0.126XB0.063XH0.043 (inch);

Murata Manufacturing's BLM18SG121TN1B is a chip bead data line filter with 2 terminals, rated for 3A current. It operates b/w -55°C to 125°C, offering a max DC resistance of 0.025 ohm and output impedance of 120 ohm at frequencies ranging from 100 MHz. This ferrite chip filter in 0603 case code is ideal for surface mount applications requiring effective noise suppression.

Wurth Elektronik 74279223560 is a FERRITE CHIP Data Line Filter with 2 terminals, rated for 10A current. It operates b/w -55 to 125°C, covering frequencies from 100 MHz to 1 GHz. Ideal for surface mount applications in electronics requiring noise suppression and signal filtering.

DATA LINE FILTER MODULE; Maximum DC Resistance: .02 ohm; Rated Current: 5 A; Minimum Operating Temperature: -40 Cel; Rated Voltage: 75 V; Dimensions: L25.4XB25.4XH10.16 (mm)/L1.0XB1.0XH0.4 (inch);

MCZ1210AH900L2TA0G by TDK is a 4-terminal data line filter with 10 Mohm insulation resistance and 5V rated voltage. With a max operating temperature of 85°C, it is ideal for applications requiring high output impedance such as data transmission systems.

Vishay Intertechnology's ILHB0805ER121V is a 2-terminal data line filter with FERRITE CHIP construction. It operates b/w -55 to 125 °C, has a DC resistance of 0.03 ohm, and output impedance of 120 OHM. Ideal for surface mount applications in electronics requiring noise suppression at frequencies up to 100 MHz.

TDK's MPZ1608S600ATAH0 is a 0603 chip bead data line filter with FERRITE CHIP technology. It offers a max operating temperature of 125°C, DC resistance of 0.02 ohm, and output impedance of 60 OHM. Ideal for applications requiring noise suppression in circuits up to 100 MHz frequency range.

FERRITE CHIP; Maximum DC Resistance: .04 ohm; Rated Current: 3 A; Additional Features: NICKEL BARRIER PLATING VIRTUALLY ELIMINATES SILVER MIGRATION; Maximum Operating Temperature: 125 Cel; No. of Terminals: 2;

LFBK1608HS601-T by Taiyo Yuden is a FERRITE CHIP filter with 2 terminals, rated for 0.35A current. With dimensions of 1.6x0.8x0.8mm, it offers an output impedance of 600Ω and max operating temperature of 125°C. Ideal for data line filtering in surface mount applications.

Cts 2499-003-X5W0-103ZLF is a Data Line Filter with 10000 Mohm Insulation Resistance, 500V Rated Voltage, and 20A Rated Current. It features FEED THROUGH CAPACITOR filter type and is ideal for panel mount applications in temperatures ranging from -55 to 125 °C.

The TDK MPZ1608S121ATAH0 is a FERRITE CHIP data line filter with 2 terminals. It has a max operating temperature of 125°C and min of -55°C. With dimensions of 1.6x0.8x0.8mm, it offers an output impedance of 120 ohms and rated current of 2A, suitable for surface mount applications in various electronic devices.

HZ0603B112R-10 by Laird Technologies is a chip bead data line filter with 2 terminals, operating b/w -40 to 125 °C. With a max frequency of 1000 MHz and DC resistance of 0.8 ohm, it is ideal for applications requiring noise suppression in high-frequency circuits. This surface mount filter measures L1.6XB.8XH.8 mm and has an output impedance of 1100 OHM, making it suitable for compact electronic devices.