Image shown is a representation only.
| Manufacturer | Adam Tech |
|---|---|
| Manufacturer's Part Number | DPD-09-10-B3 |
| Description | D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: MALE/FEMALE; Dielectric Withstanding Voltage (V): 1000VAC; Contact Style: RND PIN-SKT; |
| Datasheet | DPD-09-10-B3 Datasheet |
| NAME | DESCRIPTION |
|---|---|
| PCB Contact Pattern: | STAGGERED |
| Mating Contact Finish: | GOLD FLASH OVER NICKEL |
| Sub-Category: | D Type Connectors |
| Shell Finish: | ZINC |
| No. of Rows Loaded: | 2+2 |
| Termination Type: | SOLDER |
| Maximum Operating Temperature (Cel): | 125 |
| Body Length: | 1.213 inch |
| Contact Gender: | MALE/FEMALE |
| Connector Type: | D SUBMINIATURE CONNECTOR |
| Contact Material: | PHOSPHOR BRONZE |
| Mounting Option-1: | #4-40 |
| Contact Resistance: | 20 mohm |
| Mounting Option-2: | LOCKING |
| Insulation Resistance: | 5000000000 ohm |
| Mounting Style: | RIGHT ANGLE |
| Other Names: | 2057-DPD-09-10-B3 |
| Plating Thickness (inch): | FLASH |
| Contact Style: | RND PIN-SKT |
| No. of PCB Rows: | 2+2 |
| Mounting Type: | BOARD |
| Body Depth: | .768 inch |
| Minimum Operating Temperature: | -65 Cel |
| Total No. of Contacts: | 9+9 |
| Body Width: | 1.244 inch |
| Dielectric Withstanding Voltage (V): | 1000VAC |
| Terminal Pitch (mm): | 2.7686 |
| Terminal Length: | .125 inch |
| Termination Contact Finish: | Gold Flash (Au) - with Nickel (Ni) barrier |
| Rated Current - Signal: | 5 A |
| Insulator Material: | GLASS FILLED POLYBUTYLENE TEREPHTHALATE |
| Additional Features: | ROHS COMPLIANT |
| Insulator Color: | BLACK |
| Reference Standard: | UL, CSA |
| Option: | GENERAL PURPOSE |
| Contact Pattern: | STAGGERED |
| Mating Contact Pitch (inch): | 0.109 |
| Shell Material: | STEEL |
| Body or Shell Style: | PLUG-RECEPTACLE |
| Reliability: | COMMERCIAL |
