Image shown is a representation only.
| Manufacturer | Amphenol Communications Solutions |
|---|---|
| Manufacturer's Part Number | DDM50P500M |
| Description | D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: MALE; Mating Contact Row Spacing (inch): 0.112; PCB Contact Pattern: STAGGERED; |
| Datasheet | DDM50P500M Datasheet |
| NAME | DESCRIPTION |
|---|---|
| PCB Contact Pattern: | STAGGERED |
| Mating Contact Finish: | NOT SPECIFIED |
| IEC Conformity: | NO |
| Sub-Category: | D Type Connectors |
| Empty Shell: | NO |
| Shell Finish: | CADMIUM |
| MIL Conformity: | NO |
| No. of Rows Loaded: | 3 |
| Termination Type: | SOLDER |
| Maximum Operating Temperature (Cel): | 125 |
| PCB Contact Row Spacing (mm): | 2.8448 |
| Contact Gender: | MALE |
| Connector Type: | D SUBMINIATURE CONNECTOR |
| Contact Material: | NOT SPECIFIED |
| Mounting Option-1: | LOCKING |
| Contact Resistance: | 7.3 mohm |
| Insulation Resistance: | 5000000000 ohm |
| UL Flammability Code: | 94V-0 |
| Mounting Style: | RIGHT ANGLE |
| Mixed Contacts: | NO |
| Contact Style: | RND PIN-SKT |
| Filter Feature: | NO |
| No. of PCB Rows: | 3 |
| Mating Contact Row Spacing (inch): | 0.112 |
| Mounting Type: | BOARD |
| JESD-609 Code: | e4 |
| Minimum Operating Temperature: | -55 Cel |
| Total No. of Contacts: | 50 |
| Terminal Pitch (mm): | 2.7686 |
| Terminal Length: | .157 inch |
| Termination Contact Finish: | Gold (Au) - with Nickel (Ni) barrier |
| Rated Current - Signal: | 7.5 A |
| Insulator Material: | POLYETHYLENE |
| Reference Standard: | UL |
| Option: | GENERAL PURPOSE |
| Contact Pattern: | STAGGERED |
| Mating Contact Pitch (inch): | 0.109 |
| Shell Material: | STEEL |
| Shell Size: | 5/D |
| Reliability: | COMMERCIAL |
| DIN Conformance: | NO |
