ADPD1080WBCPZR7 by Analog Devices | General Purpose ICs

Image shown is a representation only.

Manufacturer	Analog Devices
Manufacturer's Part Number	ADPD1080WBCPZR7
Description	CONSUMER CIRCUIT; Temperature Grade: INDUSTRIAL; Terminal Form: NO LEAD; No. of Terminals: 28; Package Code: HVQCCN; Package Shape: SQUARE;
Datasheet	ADPD1080WBCPZR7 Datasheet
In Stock	187

NAME	DESCRIPTION
Package Body Material:	UNSPECIFIED
Maximum Seated Height:	.8 mm
Minimum Supply Voltage (Vsup):	1.7 V
Surface Mount:	YES
Minimum Operating Temperature:	-40 Cel
No. of Functions:	1
No. of Terminals:	28
Terminal Position:	QUAD
Package Style (Meter):	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE
Screening Level:	AEC-Q100
Length:	4 mm
JESD-30 Code:	S-XQCC-N28
Package Shape:	SQUARE
Terminal Form:	NO LEAD
Maximum Operating Temperature:	105 Cel
Peak Reflow Temperature (C):	260
Package Code:	HVQCCN
General IC Type:	CONSUMER CIRCUIT
Width:	4 mm
Terminal Pitch:	.4 mm
Temperature Grade:	INDUSTRIAL
Maximum Supply Voltage (Vsup):	1.9 V
Moisture Sensitivity Level (MSL):	3

Pricing (USD)

Qty.	Unit Price	Ext. Price
187	$6.329	$1,183.523

Diodes Inc. BSS84-7-F is a P-channel FET with 50V DS breakdown voltage, 0.13A max drain current, and 10 ohm RDS(on). Ideal for switching applications, it features a single configuration with built-in diode in a small outline package. Operating in enhancement mode at up to 150°C, it has Gull Wing terminals and matte tin finish.

LM2675M-ADJ/NOPB by Texas Instruments is a voltage-mode switching regulator with 1A output current, 37V max output voltage, and 260kHz max switching frequency. Ideal for automotive applications due to its -40°C to 125°C operating temperature range and compact small outline package design.

OPA2227UA by Texas Instruments is a dual operational amplifier with low-offset voltage of 200 uV and bias current of 0.01 uA. It operates at temperatures ranging from -40 to 85 °C, making it suitable for industrial applications requiring precise signal amplification. With a unity gain bandwidth of 8000 kHz, this op amp is ideal for high-frequency circuit designs.

RECTIFIER DIODE; Surface Mount: NO; Maximum Output Current: .15 A; Maximum Reverse Recovery Time: .004 us; Maximum Operating Temperature: 200 Cel; No. of Phases: 1;

RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;

NDT2955 by Onsemi is a P-CHANNEL FET with 60V DS Breakdown Voltage, ideal for SWITCHING applications. It features a max IDM of 15A and EAS of 174mJ, suitable for ENHANCEMENT MODE operation. With a compact SMALL OUTLINE package and -55 to 150 °C operating range, it offers efficient power dissipation up to 3W.

N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .3 W; Maximum Drain Current (ID): .115 A; Maximum Drain-Source On Resistance: 7.5 ohm;

NPN; Configuration: SINGLE; Surface Mount: YES; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;

1N4148WT-7 by Diodes Inc. is a fast recovery rectifier diode with a max reverse recovery time of 0.004 us and a max forward voltage of 1.25 V. It has a package style of small outline, making it suitable for surface mount applications where high-speed switching is required at temperatures ranging from -65 to 150 °C.