LT1206CR by Analog Devices | Amplifiers

Image shown is a representation only.

Manufacturer	Analog Devices
Manufacturer's Part Number	LT1206CR
Description	OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 7; Package Code: TO-263; Package Shape: RECTANGULAR;
Datasheet	LT1206CR Datasheet
In Stock	174

NAME	DESCRIPTION
Package Body Material:	Plastic/Epoxy
Maximum Time At Peak Reflow Temperature (s):	20 s
Maximum Seated Height:	0.192 in (4.877 mm)
Maximum Supply Voltage Limit:	18 V
Sub-Category:	Operational Amplifiers
Surface Mount:	Yes
Terminal Finish:	Tin/Lead - with Nickel barrier
No. of Terminals:	7
Maximum Input Offset Voltage:	15000 uV
Nominal Unity Gain Bandwidth:	60 MHz
Terminal Position:	Single
Package Style (Meter):	Small Outline, Heat Sink/Slug
Technology:	BIPOLAR
JESD-30 Code:	R-PSSO-G7
Package Shape:	Rectangular
Terminal Form:	Gull Wing
Maximum Operating Temperature:	70 °C (158 °F)
Package Code:	TO-263
Amplifier Type:	Operational Amplifier
Nominal Slow Rate:	900 V/us
Width:	0.35 in (8.89 mm)
Moisture Sensitivity Level (MSL):	1
Nominal Common Mode Reject Ratio:	62 dB
Nominal Negative Supply Voltage (Vsup):	-5 V
JESD-609 Code:	e0
Minimum Operating Temperature:	0 °C (32 °F)
Maximum Average Bias Current (IIB):	5 uA
No. of Functions:	1
Qualification:	No
Length:	0.403 in (10.2235 mm)
Nominal Supply Voltage / Vsup (V):	5 V
Peak Reflow Temperature (C):	235 °C (455 °F)
Maximum Negative Supply Voltage Limit:	-18 V
Terminal Pitch:	0.05 in (1.27 mm)
Temperature Grade:	Commercial

Pricing (USD)

Qty.	Unit Price	Ext. Price
174	-	-

MMBT3904LT1G by Onsemi is a NPN BJT with max. collector-emitter voltage of 40V, hFE of 30, and fT of 300MHz. Ideal for small signal applications in electronics due to its compact size, high transition frequency, and low power dissipation capabilities.

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

USB2514BI-AEZG by Microchip is a BUS CONTROLLER IC with 36 terminals, operating at 3.3V, supporting I2C, SMBUS, and USB buses. It has a clock frequency of up to 24MHz and can withstand industrial temperatures from -40°C to 85°C. This chip carrier package is surface mountable and suitable for various applications requiring USB connectivity.

N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .35 W; Terminal Finish: TIN LEAD; Maximum Operating Temperature: 150 Cel;

Other Regulators; No. of Terminals: 3; JESD-609 Code: e0; Terminal Position: SINGLE; Adjustability: ADJUSTABLE; Maximum Load Regulation (%): 1.5 %;

FTDI's FT232RL-TUBE is a bus controller with 28 terminals, operating at 3.3-5.25V. It supports USB, VBUS, and UART interfaces with a data transfer rate of 60MBps. Ideal for industrial applications requiring RS232/RS422/RS485 compatibility in compact designs due to its small outline package style.

FDLL4148 by Onsemi is a single rectifier diode with a max reverse recovery time of 0.004 us. With a max forward voltage of 1V and output current of 0.2A, it is ideal for applications requiring fast switching speeds in electronic circuits. The diode's glass package body material and isolated case connection make it suitable for surface mount designs operating at temperatures up to 175°C.

RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;

MMBT2907ALT1G by Onsemi is a PNP BJT transistor with 100 min hFE, 60V VCEO, and 200MHz fT. Ideal for switching applications, it has a small outline package with Gull Wing terminals and can handle up to 0.6A of collector current.

GENERAL CONN ACCESSORY; Associated Military - Specifications: MIL-C-55302/69, MIL-C-38999; Maximum Operating Temperature: 200 Cel; MIL-Connector Accessory: CONTACT; Terminal Type: CRIMP; MIL Conformity: YES;