MAX251MLP by Analog Devices | Interface ICs

Image shown is a representation only.

Manufacturer	Analog Devices
Manufacturer's Part Number	MAX251MLP
Description	LINE TRANSCEIVER; Temperature Grade: MILITARY; Terminal Form: NO LEAD; No. of Terminals: 20; Package Code: QCCN; Package Shape: SQUARE;
Datasheet	MAX251MLP Datasheet
In Stock	1,158

NAME	DESCRIPTION
Package Body Material:	CERAMIC, METAL-SEALED COFIRED
Nominal Supply Voltage:	10 V
Output Characteristics:	TOTEM-POLE
Maximum Seated Height:	2.032 mm
Minimum Out Swing:	10 V
Sub-Category:	Line Driver or Receivers
Surface Mount:	YES
Maximum Supply Current:	2.5 mA
Terminal Finish:	TIN LEAD
No. of Terminals:	20
Terminal Position:	QUAD
Package Style (Meter):	CHIP CARRIER
Technology:	CMOS
JESD-30 Code:	S-CQCC-N20
Package Shape:	SQUARE
Terminal Form:	NO LEAD
Maximum Operating Temperature:	125 Cel
Package Code:	QCCN
Interface Standard:	EIA-232-C; V.28
Interface IC Type:	LINE TRANSCEIVER
Width:	8.89 mm
Maximum Output Low Current:	3.2 Amp
Output Polarity:	TRUE
Input Characteristics:	SCHMITT TRIGGER
Driver No. of Bits:	2
Differential Output:	NO
JESD-609 Code:	e0
Minimum Operating Temperature:	-55 Cel
No. of Functions:	1
Qualification:	Not Qualified
Package Equivalence Code:	LCC20,.35SQ
Receiver No. of Bits:	2
Length:	8.89 mm
Maximum Receive Delay:	0 ns
Nominal Negative Supply Voltage:	-10 V
Additional Features:	ISOLATED DATA INTERFACE-PAIRED WITH MAX250; RS-232 TO OPTO INTERFACE; TRISTATABLE RECEIVERS
Terminal Pitch:	1.27 mm
Temperature Grade:	MILITARY
Power Supplies (V):	+-10

Pricing (USD)

Qty.	Unit Price	Ext. Price
1,158	-	-

NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .8 A; Package Shape: ROUND;

NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;

NXP Semiconductors' BSS138BK,215 is a N-CHANNEL FET with 0.36A max drain current and 0.42W power dissipation. Ideal for applications requiring single configuration and surface mount technology, such as enhancement mode operation in temperatures up to 150°C.

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;

AMS1117-3.3 by Advanced Monolithic Systems is a fixed positive single output LDO regulator with 1A max output current, 3% voltage tolerance, and 1.3V dropout voltage. Ideal for applications requiring stable 3.3V supply in compact designs due to its small outline package and excellent load regulation of 0.025%.

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;

RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;

IRLML6402TRPBF by Infineon is a P-CHANNEL FET for SWITCHING applications. It features a 20V DS Breakdown Voltage, 22A IDM, and 0.065 ohm RDS(on). With a small outline package and matte tin finish, it operates in temperatures from -55 to 150 °C.

FTDI's FT232RL-REEL is a bus controller with 28 terminals, operating at 3.3V to 5.25V. It supports USB, VBUS, and UART buses with a data transfer rate of 60MBps. Ideal for industrial applications due to its CMOS technology and compatibility with RS232, RS422, and RS485 standards.

FDN306P by Onsemi is a P-CHANNEL FET with 12V DS Breakdown Voltage, ideal for SWITCHING applications. It features SINGLE configuration with BUILT-IN DIODE and GULL WING terminals. Operating in ENHANCEMENT MODE, it has a max ID of 2.6A and 0.04 ohm RDS(on), suitable for small outline packages at temperatures ranging from -55 to 150°C.