Image shown is a representation only.
| Manufacturer | Analog Devices |
|---|---|
| Manufacturer's Part Number | OP295GP |
| Description | OPERATIONAL AMPLIFIER; Temperature Grade: AUTOMOTIVE; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR; |
| Datasheet | OP295GP Datasheet |
| In Stock | 179 |
| NAME | DESCRIPTION |
|---|---|
| Package Body Material: | Plastic/Epoxy |
| Maximum Seated Height: | 0.21 in (5.33 mm) |
| Frequency Compensation: | Yes |
| Maximum Supply Voltage Limit: | 18 V |
| Maximum Bias Current (IIB) @25C: | 20 nA |
| Sub-Category: | Operational Amplifiers |
| Maximum Supply Current: | 350 μA |
| Surface Mount: | No |
| Terminal Finish: | Tin Lead |
| No. of Terminals: | 8 |
| Maximum Input Offset Voltage: | 800 uV |
| Nominal Unity Gain Bandwidth: | 85 kHz |
| Terminal Position: | Dual |
| Package Style (Meter): | In Line |
| Technology: | BICMOS |
| JESD-30 Code: | R-PDIP-T8 |
| Low-Offset: | Yes |
| Minimum Voltage Gain: | 500000 |
| Package Shape: | Rectangular |
| Terminal Form: | Through-Hole |
| Maximum Operating Temperature: | 125 °C (257 °F) |
| Package Code: | DIP |
| Amplifier Type: | Operational Amplifier |
| Nominal Slow Rate: | 0.03 V/us |
| Width: | 0.3 in (7.62 mm) |
| Architecture: | Voltage Feedback |
| Nominal Common Mode Reject Ratio: | 110 dB |
| Micropower: | Yes |
| Nominal Negative Supply Voltage (Vsup): | -15 V |
| JESD-609 Code: | e0 |
| Minimum Operating Temperature: | -40 °C (-40 °F) |
| Maximum Average Bias Current (IIB): | 30 nA |
| No. of Functions: | 2 |
| Qualification: | No |
| Minimum Common Mode Reject Ratio: | 86 dB |
| Package Equivalence Code: | DIP8,.3 |
| Length: | 0.365 in (9.27 mm) |
| Nominal Supply Voltage / Vsup (V): | 15 V |
| Maximum Negative Supply Voltage Limit: | -18 V |
| Terminal Pitch: | 0.1 in (2.54 mm) |
| Temperature Grade: | Automotive |
| Power Supplies (V): | 3/30/±3/±15 V |
