13445-4X778 by Apem Components | Switches

Image shown is a representation only.

Manufacturer	Apem Components
Manufacturer's Part Number	13445-4X778
Description	PUSHBUTTON SWITCH; Mounting Feature: PANEL MOUNT-THREADED; Switch Function: DPDT; Type (Actuator): PLUNGER; Contact Function: (ON)-OFF; Contact Resistance: 10 mohm;
Datasheet	13445-4X778 Datasheet

NAME	DESCRIPTION
Maximum DC Contact Current:	4 A
Center Contact Plating:	GOLD OVER NICKEL
Center Contact Material:	SILVER
Type (Bushing):	15/32-32
Length (Bushing):	.295 inch
Housing Material:	POLYBUTYLENE TEREPHTHALATE
Type (Actuator):	PLUNGER
Maximum AC Contact Voltage:	125 V
Terminal Finish:	Gold (Au) - with Nickel (Ni) barrier
Actuator Travel (mm):	2.0066
Switch Action:	MOMENTARY
Termination Type:	SOLDER
Electrical Life:	10000 Cycle(s)
Maximum Operating Temperature:	85 Cel
Manufacturer Series:	13000X778
Material (Actuator):	BRASS
Contact Resistance:	10 mohm
Insulation Resistance:	1000000000 ohm
Maximum AC Contact Current:	4 A
End Contact Material:	SILVER
Angle (Actuator):	0 deg
Other Names:	13445-4X778-ND 679-3564 134454X778-ND Q3488810 13445-4X778
Maximum DC Contact Voltage:	28 V
DC Maximum Rating R Load (Contact):	4A@28VDC
Dielectric Withstand Volts (V):	2000VRMS
Contact Function:	(ON)-OFF
Packing Method:	BULK
Switch Type:	PUSHBUTTON SWITCH
AC Maximum Rating R Load (Contact):	4A@125VAC
Sealing:	EPOXY TERMINAL SEALED; IP67; SPLASH PROOF
JESD-609 Code:	e4
Minimum Operating Temperature:	-40 Cel
Mounting Feature:	PANEL MOUNT-THREADED
Body Width:	16 inch
Switch Function:	DPDT
Terminal Length:	.161 inch
Length (Actuator):	.157 inch
End Contact Plating:	GOLD OVER NICKEL
Insulator Material:	DIALLYL PHTHALATE
Body Height:	15.1 mm
Body Length/Diameter:	16 mm
Diameter (Bushing):	.469 inch

Popular Products

SN65HVD234DR by Texas Instruments is an 8-terminal interface circuit with a data rate of 1 Mbps. Operating temperature ranges from -40 to 125 °C, making it ideal for automotive applications. With a supply voltage of 3.3 V and low current draw of 6 mA, it's suitable for network interfaces in compact designs.

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;

MMBT2222ALT1G by Onsemi is a NPN BJT transistor with 3 terminals, max power dissipation of 0.3W, and hFE of 75. Ideal for switching applications, it operates b/w -55 to 150 °C with a max collector-emitter voltage of 40V. This surface-mount device has a transition frequency of 300MHz and turn-on time of 35ns.

OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;

N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .35 W; Maximum Time At Peak Reflow Temperature (s): 10; Terminal Finish: MATTE TIN;

OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;

87832-1420 by Molex is a 14-contact board connector with 0.079" pitch, suitable for commercial applications. It features matte tin over nickel finish, glass-filled polyamide insulator, and polarization key for easy assembly. Withstanding voltage of 1400VAC and operating temperature range from -55 to 105°C make it reliable for various electronic devices.

LM358AN by Texas Instruments is an Operational Amplifier with 2 functions. It has a Max Input Offset Voltage of 5000 uV and Nominal Common Mode Reject Ratio of 85 dB. Widely used in voltage-feedback applications due to its high Min Voltage Gain of 15000 and Unity Gain Bandwidth of 1000 kHz.

FIXED POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Package Code: TO-220; Terminal Form: THROUGH-HOLE; Maximum Input Voltage Absolute: 35 V; Maximum Voltage Tolerance: 5 %;