Image shown is a representation only.
| Manufacturer | Apem Components |
|---|---|
| Manufacturer's Part Number | 25146NAH |
| Description | SLIDE SWITCH; Mounting Feature: THROUGH HOLE-STRAIGHT; Switch Function: DPDT; Type (Actuator): HIGH TYPE; Contact Function: ON-ON; Solderability: WAVE; |
| Datasheet | 25146NAH Datasheet |
| NAME | DESCRIPTION |
|---|---|
| Maximum DC Contact Current: | 1 A |
| No. of Positions: | 2 |
| Center Contact Plating: | SILVER |
| Housing Material: | GLASS FILLED POLYAMIDE |
| Type (Actuator): | HIGH TYPE |
| Maximum AC Contact Voltage: | 125 V |
| Solderability: | WAVE |
| Terminal Finish: | Silver (Ag) |
| Switch Action: | LATCHED |
| Termination Type: | SOLDER |
| Electrical Life: | 10000 Cycle(s) |
| Maximum Operating Temperature: | 85 Cel |
| Material (Actuator): | GLASS FILLED POLYAMIDE |
| Contact Resistance: | 10 mohm |
| Insulation Resistance: | 1000000000 ohm |
| Maximum AC Contact Current: | 4 A |
| Other Names: |
25146NAH-ND 679-1892 |
| Maximum DC Contact Voltage: | 30 V |
| DC Maximum Rating R Load (Contact): | 1A@30VDC |
| Contact Function: | ON-ON |
| Packing Method: | BULK |
| Switch Type: | SLIDE SWITCH |
| AC Maximum Rating R Load (Contact): | 4A@125VAC |
| Sealing: | EPOXY TERMINAL SEALED |
| JESD-609 Code: | e4 |
| Minimum Operating Temperature: | -40 Cel |
| Mounting Feature: | THROUGH HOLE-STRAIGHT |
| Body Width: | 12.5 inch |
| Switch Function: | DPDT |
| Terminal Length: | .149 inch |
| Length (Actuator): | .11 inch |
| End Contact Plating: | SILVER |
| Insulator Material: | POLYBUTYLENE TEREPHTHALATE |
| Body Height: | 8.1 mm |
| Body Length/Diameter: | 14.1 mm |
