
Image shown is a representation only.
Manufacturer | Apem Components |
---|---|
Manufacturer's Part Number | 25536NA |
Description | SLIDE SWITCH; Mounting Feature: THROUGH HOLE-RIGHT ANGLE; Switch Function: SPDT; Type (Actuator): SIDE TYPE; Contact Function: ON-ON; Solderability: WAVE; |
Datasheet | 25536NA Datasheet |
NAME | DESCRIPTION |
---|---|
Maximum DC Contact Current: | 1 A |
No. of Positions: | 2 |
Center Contact Plating: | SILVER |
Center Contact Material: | SILVER |
Housing Material: | GLASS FILLED NYLON |
Type (Actuator): | SIDE TYPE |
Maximum AC Contact Voltage: | 250 V |
Solderability: | WAVE |
Switch Action: | LATCHED |
Terminal Material: | SILVER |
Termination Type: | SOLDER |
Electrical Life: | 10000 Cycle(s) |
Maximum Operating Temperature: | 85 Cel |
Material (Actuator): | GLASS FILLED POLYAMIDE |
Contact Resistance: | 10 mohm |
Insulation Resistance: | 1000000000 ohm |
Maximum AC Contact Current: | 2 A |
End Contact Material: | SILVER |
Angle (Actuator): | 0 deg |
Maximum DC Contact Voltage: | 30 V |
DC Maximum Rating R Load (Contact): | 1A@30VDC |
Dielectric Withstand Volts (V): | 1000VRMS |
Contact Function: | ON-ON |
PCB Hole Count: | 3 |
Packing Method: | BULK |
Switch Type: | SLIDE SWITCH |
AC Maximum Rating R Load (Contact): | 2A@250VAC |
Sealing: | EPOXY TERMINAL SEALED |
Minimum Operating Temperature: | -40 Cel |
Mounting Feature: | THROUGH HOLE-RIGHT ANGLE |
Body Width: | 7.5 inch |
Switch Function: | SPDT |
Terminal Length: | .15 inch |
Length (Actuator): | .091 inch |
End Contact Plating: | SILVER |
Insulator Material: | THERMOPLASTIC |
Body Height: | 8.1 mm |
Body Length/Diameter: | 14.1 mm |
Washability: | PARTIAL |