3646NF by Apem Components | Switches

Image shown is a representation only.

Manufacturer	Apem Components
Manufacturer's Part Number	3646NF
Description	TOGGLE SWITCH; Type (Actuator): TOGGLE; Contact Function: ON-ON; End Contact Material: SILVER; Switch Action: LATCHED; Length (Actuator): .689 inch;
Datasheet	3646NF Datasheet

NAME	DESCRIPTION
End Contact Material:	SILVER
Angle (Actuator):	30 deg
Other Names:	679-1279
DC Maximum Rating R Load (Contact):	12A@28VDC
Dielectric Withstand Volts (V):	2000VRMS
Contact Function:	ON-ON
Center Contact Material:	SILVER
Length (Bushing):	.413 inch
Type (Actuator):	TOGGLE
Switch Type:	TOGGLE SWITCH
Minimum Operating Temperature:	-40 Cel
Body Width:	21.5 inch
Switch Action:	LATCHED
Termination Type:	SCREW
Length (Actuator):	.689 inch
Electrical Life:	10000 Cycle(s)
Insulator Material:	PHENOLIC
Body Height:	24.6 mm
Body Length/Diameter:	35 mm
Maximum Operating Temperature:	85 Cel
Material (Actuator):	BRASS
Contact Resistance:	10 mohm
Insulation Resistance:	1000000000 ohm
Diameter (Bushing):	.472 inch

Popular Products

CONNECTOR ACCESSORY; Alternate Contact Sources: MILITARY; Removal Tool Sources: MILITARY; Material: COPPER ALLOY; National Stock Number (NSN): 5999004733551; Mating Contacts: M39029/56-348, M39029/57-354;

BSS138NH6327XTSA2 by Infineon is a N-CHANNEL FET with 60V DS Breakdown Voltage, ideal for small signal applications. Operating in Enhancement Mode, it has 0.36W Power Dissipation and 3.5 ohm Drain-Source Resistance. With Gull Wing terminals and AEC-Q101 reference standard, it's suitable for automotive electronics due to its high temperature range of -55 to 150 °C.

Vishay Intertechnology's 1N4148WS is a single rectifier diode with a max forward voltage of 1V and output current of 0.15A. With a fast reverse recovery time of 0.004us, it operates up to 150°C. Ideal for applications requiring high-speed switching and low power consumption in surface mount configurations.

NPN; Configuration: 8 BANKS, DARLINGTON WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: NO; Maximum Collector Current (IC): .5 A; JESD-30 Code: R-PDIP-T18; Package Body Material: PLASTIC/EPOXY;

NUP2105LT1G by Onsemi is a Transient Suppression Device with 350W power dissipation, 29.1V breakdown voltage, and 44V clamping voltage. Commonly used in electronic circuits for surge protection due to its bidirectional polarity and silicon diode element material.

NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Transistor Application: SWITCHING; Transistor Element Material: SILICON;

SBAV99LT1G by Onsemi is a rectifier diode with a max repetitive peak reverse voltage of 100V. It has a small outline package style and a fast max reverse recovery time of 0.006 us. It is commonly used in applications requiring low power dissipation and high operating temperatures.

RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;

N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; No. of Elements: 1; Terminal Form: GULL WING;