5GSH935+1SS09-10.4 by Apem Components | Switches

Image shown is a representation only.

Manufacturer	Apem Components
Manufacturer's Part Number	5GSH935+1SS09-10.4
Description	KEYPAD SWITCH; Mounting Feature: SURFACE MOUNT-STRAIGHT; Switch Function: SPST; Type (Actuator): ROUND TYPE; Actuator Travel (mm): 1; Maximum Operating Force: 3.5 N;
Datasheet	5GSH935+1SS09-10.4 Datasheet

NAME	DESCRIPTION
Maximum DC Contact Current:	.05 A
Maximum Contact Bounce Time:	.5 ms
Housing Material:	PPS
Type (Actuator):	ROUND TYPE
Actuator Travel (mm):	1
Switch Action:	MOMENTARY
Termination Type:	SOLDER
Electrical Life:	10000000 Cycle(s)
Maximum Operating Temperature:	160 Cel
Material (Actuator):	PPS
Contact Resistance:	30 mohm
Insulation Resistance:	10000000 ohm
Color (Actuator):	BLACK
Maximum DC Contact Voltage:	24 V
DC Maximum Rating R Load (Contact):	0.05A@24VDC
Maximum Operating Force:	3.5 N
Switch Type:	KEYPAD SWITCH
Sealing:	IP67
Minimum Operating Temperature:	-40 Cel
Mounting Feature:	SURFACE MOUNT-STRAIGHT
Body Width:	10 inch
Switch Function:	SPST
Circuit Config:	1X1
Body Height:	6.4 mm
Additional Features:	PANEL MOUNTABLE
Body Length/Diameter:	10 mm
No. of Switches:	1

Popular Products

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;

AB26TRB-32.768KHZ--T by Abracon is a crystal oscillator with 20 ppm frequency tolerance, 126% stability, and 35000 ohm series resistance. Ideal for applications requiring 0.032768 MHz nominal frequency in surface mount configurations.

N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .83 W; JESD-609 Code: e3; Minimum DS Breakdown Voltage: 60 V;

LIS3DHTR by STMicroelectronics is a 16-terminal accelerometer with output range of 0.18-1.62V, ideal for motion sensing applications. Operating temperature ranges from -40 to 85°C, making it suitable for various environments. With a compact square package body of 3x3mm and digital voltage output type, it is commonly used in surface mount designs.

N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .83 W; Package Body Material: PLASTIC/EPOXY; JEDEC-95 Code: TO-236AB;

SWITCHING REGULATOR; Temperature Grade: AUTOMOTIVE; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;

P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 1.92 W; Maximum Operating Temperature: 150 Cel; Package Body Material: PLASTIC/EPOXY;

FDD5614P by Onsemi is a P-CHANNEL Power FET with 60V DS Breakdown Voltage, ideal for SWITCHING applications. It features 45A IDM and 0.1 ohm RDS(ON), operating in ENHANCEMENT MODE at up to 175°C. The PLASTIC/EPOXY package with GULL WING terminals ensures efficient heat dissipation and reliable performance.

LM358M by Texas Instruments is an Operational Amplifier with 2 functions, featuring a max input offset voltage of 9000 uV and a nominal voltage of 5 V. It is commonly used in applications requiring high common mode rejection ratio and low bias current, such as sensor interfaces and signal conditioning circuits.