8432WCDB by Apem Components | Switches

Image shown is a representation only.

Manufacturer	Apem Components
Manufacturer's Part Number	8432WCDB
Description	Special Switches; Mounting Feature: THROUGH HOLE-RIGHT ANGLE; Type (Actuator): PUSHBUTTON; Contact Function: ON-(ON); Switch Action: MOMENTARY; Maximum Operating Temperature: 85 Cel;
Datasheet	8432WCDB Datasheet

NAME	DESCRIPTION
Center Contact Plating:	GOLD
Center Contact Material:	BRASS
Type (Bushing):	1/4-40
Length (Bushing):	.275 inch
Housing Material:	STAINLESS STEEL
Type (Actuator):	PUSHBUTTON
Finish (Actuator):	NICKEL
Actuator Travel (mm):	2.6924
Switch Action:	MOMENTARY
Termination Type:	SOLDER
Electrical Life:	30000 Cycle(s)
Maximum Operating Temperature:	85 Cel
Manufacturer Series:	8000
Material (Actuator):	BRASS
Contact Resistance:	10 mohm
Insulation Resistance:	1000000000 ohm
End Contact Material:	BRASS
Angle (Actuator):	0 deg
Dielectric Withstand Volts (V):	1000VRMS
Contact Function:	ON-(ON)
PCB Hole Count:	5
Sealing:	EPOXY
Minimum Operating Temperature:	-40 Cel
Mounting Feature:	THROUGH HOLE-RIGHT ANGLE
Body Width:	11.9888 inch
Terminal Length:	.145 inch
Length (Actuator):	.248 inch
End Contact Plating:	GOLD
Insulator Material:	DIALLYL PHTHALATE
Body Height:	21.2852 mm
Body Length/Diameter:	13.1826 mm
Diameter (Bushing):	.25 inch
AC Maximum Power Rating R Load (Contact):	0.4VA@20VAC

Popular Products

BAV99+ by Multicomp Pro is a series connected diode with 0.2A output current and 75V peak reverse voltage. Its 0.006us reverse recovery time makes it ideal for high-speed applications. This small outline rectifier diode is designed for surface mount installation in electronic circuits.

Analog Waveform Generation Functions; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;

Analog Waveform Generation Functions; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;

N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Package Shape: RECTANGULAR; Terminal Position: DUAL;

MC33269T-3.3G by Onsemi is a fixed positive single output LDO regulator with a max output current of 0.8 A and a dropout voltage of 1.35 V. It is commonly used in applications that require stable voltage regulation, such as power supplies for electronic devices.

TE Connectivity's CRG0805F10R is a 10 ohm fixed resistor with 1% tolerance and 0.125 W power dissipation. It features thick film technology, SMT package style, and matte tin over nickel terminal finish. Ideal for surface mount applications in electronics, offering a temperature coefficient of 200 ppm/°C and operating voltage of 150 V.

Other Regulators; No. of Terminals: 3; Surface Mount: NO; Technology: BIPOLAR; Minimum Output Voltage-1: 1.2 V; No. of Outputs: 1;

RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;

N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Transistor Application: SWITCHING; Maximum Drain Current (ID): .115 A; No. of Terminals: 3;

TEMPERATURE SENSOR,SWITCH/DIGITAL OUTPUT,SERIAL; Mounting Feature: SURFACE MOUNT; No. of Terminals: 3; Package Shape or Style: ROUND; Housing: PLASTIC; Output Interface Type: 1-WIRE INTERFACE;