8442WCDB by Apem Components | Switches

Image shown is a representation only.

Manufacturer	Apem Components
Manufacturer's Part Number	8442WCDB
Description	PUSHBUTTON SWITCH; Mounting Feature: THROUGH HOLE-RIGHT ANGLE; Switch Function: DPDT; Type (Actuator): PUSHBUTTON; Contact Function: ON-(ON); End Contact Plating: GOLD;
Datasheet	8442WCDB Datasheet

NAME	DESCRIPTION
Maximum DC Contact Current:	.02 A
Center Contact Plating:	GOLD
Center Contact Material:	BRASS
Type (Bushing):	1/4-40
Length (Bushing):	.275 inch
Housing Material:	STAINLESS STEEL
Type (Actuator):	PUSHBUTTON
Maximum AC Contact Voltage:	20 V
Terminal Finish:	GOLD
Finish (Actuator):	NICKEL
Actuator Travel (mm):	2.6924
Switch Action:	MOMENTARY
Termination Type:	SOLDER
Electrical Life:	30000 Cycle(s)
Maximum Operating Temperature:	85 Cel
Material (Actuator):	BRASS
Contact Resistance:	10 mohm
Insulation Resistance:	1000000000 ohm
Maximum AC Contact Current:	.02 A
End Contact Material:	BRASS
Angle (Actuator):	0 deg
Maximum DC Contact Voltage:	20 V
DC Maximum Rating R Load (Contact):	.02A@20VDC
Dielectric Withstand Volts (V):	1000VRMS
Contact Function:	ON-(ON)
PCB Hole Count:	8
Packing Method:	BULK
Switch Type:	PUSHBUTTON SWITCH
AC Maximum Rating R Load (Contact):	.02A@20VAC
Sealing:	EPOXY TERMINAL SEALED
JESD-609 Code:	e4
Minimum Operating Temperature:	-40 Cel
Mounting Feature:	THROUGH HOLE-RIGHT ANGLE
Body Width:	11 inch
Switch Function:	DPDT
Terminal Length:	.145 inch
Length (Actuator):	.248 inch
End Contact Plating:	GOLD
Insulator Material:	DIALLYL PHTHALATE
Body Height:	12 mm
Body Length/Diameter:	13.2 mm
Diameter (Bushing):	.25 inch
AC Maximum Power Rating R Load (Contact):	0.4VA@20VAC

Popular Products

TE Connectivity's M39029/58-360 is a CRIMP terminal backshell for 22-28 AWG wires, rated at 5A. Ideal for male contacts in Mil-Spec applications, it offers a cross-section area of 0.34 mm2 and ensures secure connections in demanding environments.

Other Interface ICs; Temperature Grade: MILITARY; Terminal Form: FLAT; No. of Terminals: 14; Package Code: DFP; Package Shape: SQUARE;

LM78L05ACMX/NOPB by Texas Instruments is a fixed positive single output standard regulator with an output voltage of 5V and max current of 0.1A. It operates b/w 0-125°C, has a dropout voltage of 1.6V, and can handle input voltages up to 30V making it ideal for various electronic applications requiring stable power supply.

LAN8720A-CP-TR by Microchip: Ethernet transceiver with 100 Mbps data rate, operates at 3.3V, and consumes 54mA max supply current. Ideal for network interfaces in commercial applications due to its small size (4x4mm) and low power consumption.

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;

MBRS340T3G by Onsemi is a Schottky rectifier diode with a max forward voltage of 0.5V and output current of 4A. It operates b/w -65°C to 150°C, making it suitable for various applications requiring high-speed switching and low power loss in a small outline package. The diode's matte tin terminal finish and dual position make it ideal for surface mount PCB designs.

OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Shape: ROUND; Maximum Bias Current (IIB) @25C: .075 uA;

RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;

NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;

RECTIFIER DIODE; Surface Mount: YES; Maximum Reverse Recovery Time: .006 us; Maximum Repetitive Peak Reverse Voltage: 70 V; Maximum Forward Voltage (VF): 1 V; Maximum Operating Temperature: 150 Cel;