MHPS4284 by Apem Components | Switches

Image shown is a representation only.

Manufacturer	Apem Components
Manufacturer's Part Number	MHPS4284
Description	KEYPAD SWITCH; Mounting Feature: THROUGH HOLE-STRAIGHT; Switch Function: 4PDT; Type (Actuator): PUSHBUTTON; Center Contact Plating: SILVER; Terminal Material: BRASS;
Datasheet	MHPS4284 Datasheet

NAME	DESCRIPTION
Maximum DC Contact Current:	.1 A
Center Contact Plating:	SILVER
Center Contact Material:	PHOSPHOR BRONZE
Type (Actuator):	PUSHBUTTON
Terminal Finish:	Silver (Ag)
Switch Action:	LATCHED
Terminal Material:	BRASS
Termination Type:	SOLDER
Electrical Life:	10000 Cycle(s)
Maximum Operating Temperature:	65 Cel
Contact Resistance:	100 mohm
Insulation Resistance:	100000000 ohm
Maximum DC Contact Voltage:	30 V
DC Maximum Rating R Load (Contact):	.1A@30VDC
Dielectric Withstand Volts (V):	500VAC
Maximum Operating Force:	2.75 N
Switch Type:	KEYPAD SWITCH
JESD-609 Code:	e4
Minimum Operating Temperature:	-20 Cel
Mounting Feature:	THROUGH HOLE-STRAIGHT
Body Width:	8.5 inch
Switch Function:	4PDT
Circuit Config:	1X1
Terminal Length:	.138 inch
Length (Actuator):	.335 inch
Body Height:	8.5 mm
Body Length/Diameter:	13 mm
No. of Switches:	1

Popular Products

FTDI's FT232RQ-REEL is a USB bus controller with 32 terminals, operating at 3.3-5.25V. It supports data transfer rates up to 60MBps and clock frequency of 12.02MHz, suitable for RS232/RS422/RS485 interfaces in various applications like industrial automation and communication systems.

TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

STM32H743ZIT6 by STMicroelectronics is a 32-bit microcontroller with integrated cache and a max supply voltage of 3.6V. It is commonly used in industrial applications, offering features such as 21 timers, CAN and USB connectivity, and low power mode.

OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;

TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Maximum Clamping Voltage: 29.2 V; Nominal Breakdown Voltage: 21.1 V; Polarity: BIDIRECTIONAL; Maximum Repetitive Peak Reverse Voltage: 18 V;

LM358M by Texas Instruments is an Operational Amplifier with 2 functions, featuring a max input offset voltage of 9000 uV and a nominal voltage of 5 V. It is commonly used in applications requiring high common mode rejection ratio and low bias current, such as sensor interfaces and signal conditioning circuits.

RECTIFIER DIODE; Surface Mount: NO; No. of Phases: 1; Maximum Reverse Recovery Time: .004 us; Config: SINGLE; Maximum Repetitive Peak Reverse Voltage: 100 V;

TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Shape: ROUND; Low-Offset: NO;

N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Maximum Drain-Source On Resistance: 7.5 ohm; Maximum Drain Current (Abs) (ID): .115 A;