Image shown is a representation only.
| Manufacturer | Apem Components |
|---|---|
| Manufacturer's Part Number | MJTP1230 |
| Description | KEYPAD SWITCH; Mounting Feature: THROUGH HOLE-STRAIGHT; Switch Function: SPST; Type (Actuator): PLUNGER TYPE; Solderability: WAVE; Circuit Config: 1X1; |
| Datasheet | MJTP1230 Datasheet |
| NAME | DESCRIPTION |
|---|---|
| Maximum DC Contact Current: | .05 A |
| Center Contact Plating: | SILVER |
| Maximum Contact Bounce Time: | 10 ms |
| Center Contact Material: | PHOSPHOR BRONZE |
| Housing Material: | STAINLESS STEEL |
| Body Color: | BLACK |
| Type (Actuator): | PLUNGER TYPE |
| Solderability: | WAVE |
| Terminal Finish: | Silver (Ag) |
| Switch Action: | MOMENTARY-TACTILE |
| Terminal Material: | BRASS |
| Termination Type: | SOLDER |
| Electrical Life: | 100000 Cycle(s) |
| Maximum Operating Temperature: | 70 Cel |
| Manufacturer Series: | MJTP |
| Material (Actuator): | THERMOPLASTIC |
| Contact Resistance: | 100 mohm |
| Insulation Resistance: | 100000000 ohm |
| Color (Actuator): | BLACK |
| End Contact Material: | BRASS |
| Angle (Actuator): | 0 deg |
| Other Names: |
679-2428 MJTP1230-ND |
| Maximum DC Contact Voltage: | 12 V |
| DC Maximum Rating R Load (Contact): | .05A@12VDC |
| Dielectric Withstand Volts (V): | 250VAC |
| PCB Hole Count: | 5 |
| Maximum Operating Force: | 1.86 N |
| Packing Method: | BULK |
| Switch Type: | KEYPAD SWITCH |
| Sealing: | MOLDED |
| JESD-609 Code: | e4 |
| Minimum Operating Temperature: | -20 Cel |
| Mounting Feature: | THROUGH HOLE-STRAIGHT |
| Body Width: | 6 inch |
| Switch Function: | SPST |
| Circuit Config: | 1X1 |
| Terminal Length: | .138 inch |
| End Contact Plating: | SILVER |
| Insulator Material: | THERMOPLASTIC |
| Body Height: | 4.1 mm |
| Body Length/Diameter: | 6 mm |
| No. of Switches: | 1 |
