
Image shown is a representation only.
Manufacturer | Apem Components |
---|---|
Manufacturer's Part Number | SLG12014 |
Description | SLIDE SWITCH; Mounting Feature: THROUGH HOLE-STRAIGHT; Switch Function: SPDT; Type (Actuator): SLIDE; Solderability: WAVE; Angle (Actuator): 0 deg; |
Datasheet | SLG12014 Datasheet |
NAME | DESCRIPTION |
---|---|
Maximum DC Contact Current: | .3 A |
No. of Positions: | 2 |
Center Contact Plating: | SILVER |
Housing Material: | STEEL |
Type (Actuator): | SLIDE |
Maximum AC Contact Voltage: | 125 V |
Solderability: | WAVE |
Terminal Finish: | Silver (Ag) |
Switch Action: | LATCHED |
Termination Type: | SOLDER |
Electrical Life: | 10000 Cycle(s) |
Maximum Operating Temperature: | 85 Cel |
Material (Actuator): | THERMOPLASTIC |
Contact Resistance: | 20 mohm |
Insulation Resistance: | 100000000 ohm |
Maximum AC Contact Current: | .3 A |
Angle (Actuator): | 0 deg |
Maximum DC Contact Voltage: | 30 V |
DC Maximum Rating R Load (Contact): | .3A@30VDC |
Dielectric Withstand Volts (V): | 500VRMS |
PCB Hole Count: | 3 |
Maximum Operating Force: | 2.7 N |
Switch Type: | SLIDE SWITCH |
AC Maximum Rating R Load (Contact): | .3A@125VAC |
Sealing: | EPOXY |
JESD-609 Code: | e4 |
Minimum Operating Temperature: | -20 Cel |
Mounting Feature: | THROUGH HOLE-STRAIGHT |
Body Width: | 5.7 inch |
Switch Function: | SPDT |
Terminal Length: | .094 inch |
Length (Actuator): | .157 inch |
End Contact Plating: | SILVER |
Insulator Material: | PHENOLIC |
Body Height: | 4.9 mm |
Body Length/Diameter: | 11 mm |
Washability: | SOLVENT |