Image shown is a representation only.
| Manufacturer | Apem Components |
|---|---|
| Manufacturer's Part Number | TP32W008000 |
| Description | PUSHBUTTON SWITCH; Mounting Feature: THROUGH HOLE-RIGHT ANGLE; Switch Function: SPDT; Type (Actuator): STANDARD PLUNGER; Contact Function: ON-(ON); Solderability: WAVE; |
| Datasheet | TP32W008000 Datasheet |
| NAME | DESCRIPTION |
|---|---|
| Maximum DC Contact Current: | .02 A |
| Center Contact Plating: | GOLD |
| Center Contact Material: | BRASS |
| Length (Bushing): | .225 inch |
| Type (Actuator): | STANDARD PLUNGER |
| Maximum AC Contact Voltage: | 20 V |
| Solderability: | WAVE |
| Terminal Finish: | Tin (Sn) - with Nickel (Ni) barrier |
| Actuator Travel (mm): | .9906 |
| Switch Action: | MOMENTARY |
| Terminal Material: | BRASS |
| Termination Type: | SOLDER |
| Electrical Life: | 60000 Cycle(s) |
| Maximum Operating Temperature: | 85 Cel |
| Manufacturer Series: | TP |
| Material (Actuator): | GLASS FILLED POLYAMIDE |
| Contact Resistance: | 50 mohm |
| Insulation Resistance: | 1000000000 ohm |
| Maximum AC Contact Current: | .02 A |
| End Contact Material: | BRASS |
| Maximum DC Contact Voltage: | 20 V |
| DC Maximum Rating R Load (Contact): | .02A@20VDC |
| Contact Function: | ON-(ON) |
| PCB Hole Count: | 5 |
| Packing Method: | BULK |
| Switch Type: | PUSHBUTTON SWITCH |
| AC Maximum Rating R Load (Contact): | .02A@20VAC |
| Sealing: | EPOXY TERMINAL SEALED |
| JESD-609 Code: | e3 |
| Minimum Operating Temperature: | -30 Cel |
| Mounting Feature: | THROUGH HOLE-RIGHT ANGLE |
| Body Width: | 8.1 inch |
| Switch Function: | SPDT |
| Terminal Length: | .129 inch |
| Length (Actuator): | .139 inch |
| End Contact Plating: | GOLD |
| Insulator Material: | POLYBUTYLENE TEREPHTHALATE |
| Body Height: | 5.55 mm |
| Body Length/Diameter: | 8.58 mm |
| Washability: | SOLVENT |
| Diameter (Bushing): | .196 inch |
| AC Maximum Power Rating R Load (Contact): | 0.4VA@20VAC |
