M9699G/A by Apple, Inc

Image shown is a representation only.

Manufacturer Apple, Inc
Manufacturer's Part Number M9699G/A
Description Apple; Product Line: Xserve; Product Type: SATA Controller; Host Interface: PCI; Form Factor: Plug-in Card; RAID Supported: Yes;
NAME DESCRIPTION
Data Transfer Rate: 150 MB/s
Standard Memory: 64 MB
Product Name: Xserve G5 PCI Hardware RAID Serial ATA Card
Platform Supported: Mac
Brand Name: Apple
RAID Supported: Yes
Form Factor: Plug-in Card
Additional Information:

NOTE:

  • RAID levels 0 and 1 require a minimum of 2 Apple Drive modules; RAID level 5 requires 3 Apple Drive modules
  • Apple recommends drive modules of the same size for each RAID set
  • The hardware RAID card does not support FireWire Target Disk mode
  • Installation of this card requires reformatting the internal drives and reinstallation of Mac OS X Server software
Marketing Information:

The PCI Hardware RAID controller card for Xserve G5 provides RAID level 0, 1 and 5 capabilities to Xserve G5's internal Serial ATA (SATA) drives. This 64-bit/66 MHz PCI card provides three independent 150 MBps Serial ATA controllers backed by a high-performance RAID processor and 64 MB of RAID controller cache with an on-card backup battery.
Product Type: SATA Controller
Host Interface: PCI
Maximum Data Transfer Rate: 150
System Requirements:
  • Mac OS X Server v10.3.4 (or later)
Total Number of SATA Ports: 3
Compatibility:
  • Xserve G5
RAID Levels: 0, 1, 5
Product Line: Xserve