FEDK10P3101/KS35 by Baumer Electric Ag | Sensors & Transducers

Image shown is a representation only.

Manufacturer	Baumer Electric Ag
Manufacturer's Part Number	FEDK10P3101/KS35
Description	LINEAR POSITION SENSOR,PHOTOELECTRIC,THROUGH BEAM; Mounting Feature: BOARD MOUNT; Output Type: ANALOG CURRENT; Package Shape or Style: RECTANGULAR; Output Range: 100mA; Maximum Supply Voltage: 30 V;
Datasheet	FEDK10P3101/KS35 Datasheet

NAME	DESCRIPTION
Minimum Supply Voltage:	10 V
Maximum Operating Current:	16 mA
Maximum Measurement Range (mm):	6 mm
Maximum Supply Voltage:	30 V
Output Range:	100mA
Output Type:	ANALOG CURRENT
Response Time:	1400 us
Housing:	PLASTIC
Minimum Operating Temperature:	-25 Cel
Mounting Feature:	BOARD MOUNT
Body Width:	12 inch
Sensors or Transducers Type:	LINEAR POSITION SENSOR,PHOTOELECTRIC,THROUGH BEAM
Package Shape or Style:	RECTANGULAR
Termination Type:	CONNECTOR
Output Interface Type:	4-WIRE INTERFACE
Body Height:	27 mm
Additional Features:	IP 65, REVERSE POLARITY PROTECTION, SHORT CIRCUIT PROTECTION
Body Length/Diameter:	14 mm
Maximum Operating Temperature:	65 Cel
Minimum Measurement Range (mm):	6 mm

Popular Products

1N4148WT by Onsemi is a single rectifier diode with a max output current of 0.3A and forward voltage of 0.72V. It has a small outline package style, matte tin terminal finish, and operates at temperatures up to 150°C. Ideal for applications requiring fast reverse recovery time such as power supplies and signal demodulation circuits.

RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;

NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;

NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;

TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;

LM358DT by STMicroelectronics is a dual operational amplifier with a max input offset voltage of 9000 uV. It operates at a nominal voltage of 5V and has a min voltage gain of 25000. This amplifier is commonly used in applications requiring high precision and low power consumption.

RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;

OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;

N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Operating Mode: ENHANCEMENT MODE; Qualification: Not Qualified;