Bourns - SRF0602-221Y

The Wurth Elektronik 74270053 is a data line filter with a ferrite bead filter type. It has a max operating temperature of 125°C and min operating temperature of -25°C. With dimensions of D16.0XH28.5 (mm), it is suitable for stud mount applications and has an output impedance of 258 ohms.

Cts 2425-001-X5U0-102AALF is a FEED THROUGH CAPACITOR with 1000uF capacitance, 100V rated voltage, and 2 terminals. It operates b/w -55 to 125 °C and has a min insulation resistance of 10,000 Mohm. Ideal for PCB mounting in data line filtering applications.

TDK's MPZ1608S600ATDH5 is a FERRITE CHIP data line filter with 2 terminals. It offers a max DC resistance of 0.02 ohm and an output impedance of 60 OHM. With dimensions of L1.6xB0.8xH0.6 (mm), it is ideal for surface mount applications in various electronic devices, ensuring efficient filtering and protection against electromagnetic interference.

HR2220V801R-10 by Laird Technologies is a chip bead data line filter with 2 terminals, operating b/w -55 to 125 °C. It offers an output impedance of 800 OHM, rated current of 8 A, and DC resistance of 0.01 ohm. Ideal for surface mount applications in filtering frequencies from 25 MHz to 1000 MHz.

BKP1608HS101-T by Taiyo Yuden is a multilayer chip data line filter with 2 terminals. It has a max operating temperature of 85°C and a min operating temperature of -55°C. This ferrite chip filter has a width of 0.8mm, length of 1.6mm, and height of 0.8mm. It is commonly used for noise suppression in electronic devices such as smartphones and tablets.

DATA LINE FILTER; Maximum DC Resistance: .3 ohm; Rated Current: .7 A; No. of Terminals: 4; Mounting Type: SURFACE MOUNT; Width (mm): 5.9;

MMZ2012S121AT000 by TDK is an 0805 chip bead data line filter with a max operating temperature of 125°C and min of -55°C. With dimensions of L2.0xB1.25xH0.85 (mm), it has a max DC resistance of 0.15 ohm and output impedance of 120 ohm, suitable for surface mount applications in electronics to suppress electromagnetic interference.

TDK's MPZ1608D101BTA00 is a 0603 chip bead filter with 2 terminals. With a max temp of 125°C and min of -55°C, it offers low DC resistance of 0.15 ohm. Ideal for data line filtering applications at frequencies ranging from 100 MHz, providing an output impedance of 100 OHM.

BK1608TS102-TV by Taiyo Yuden is a FERRITE CHIP filter with 2 terminals, rated at 0.3A current. With dimensions of L1.6xB0.8xH0.8 (mm), it has an output impedance of 1000Ω and max operating temp of 125°C. Ideal for data line filtering in surface mount applications.

Wurth Elektronik 744235900 is a Data Line Filter with 2 functions, rated at 60V. With inductance of 0.3uH and max DC resistance of 0.05 ohm, it's ideal for applications requiring a compact surface mount filter solution. Operating b/w -40 to 125°C, it offers high output impedance of 90 ohm for effective noise filtering.

FERRITE CHIP; Construction: Chip Bead; Maximum DC Resistance: .15 ohm; Maximum Frequency: 100 MHz; Material: Ferrite; Rated Current: .8 A;

Murata's BLM18SG700TN1D is a chip bead data line filter with 2 terminals, operating from -55 to 125°C. With dimensions of 1.6x0.8x0.5mm, it offers an output impedance of 70Ω and rated current of 4A. Ideal for surface mount applications, this ferrite chip filter has a max frequency of 100MHz, making it suitable for noise suppression in electronic circuits.

The TDK MMZ1005S601CT000 is a chip bead data line filter with 2 terminals, ideal for surface mount applications. With dimensions of 1x0.5x0.5mm and a max operating temperature of 125°C, it offers low DC resistance of 0.6 ohm and output impedance of 600 ohm. This ferrite chip filter is suitable for use in electronic devices requiring noise suppression on data lines.

Murata Manufacturing's BLM18AG601SN1J is a 0603 chip bead data line filter with 2 terminals. Featuring ferrite chip construction, it operates b/w -55 to 125 °C and has a max DC resistance of 0.38 ohm. With dimensions of L1.6xB0.8xH0.8 (mm), it is ideal for applications requiring a 600 OHM output impedance at frequencies ranging from 100 MHz, packed in tape for surface mount installation.

FERRITE CHIP;

TDK's MPZ2012S101AT is an 0805 chip bead filter with 2 terminals. With a max operating temp of 125°C and min freq of 100 MHz, it offers low DC resistance at 0.02 ohm. Ideal for data line filtering applications, this ferrite chip measures L2.0xB1.25xH0.85 mm and has a rated current of 4A.

HI2220R301R-10 by Laird Technologies is a chip bead data line filter with 2 terminals, operating b/w -40 to 125 °C. With dimensions of L5.59XB5.08XH3.45 mm, it offers a frequency range from 25 MHz to 1000 MHz and an output impedance of 300 ohm. Ideal for surface mount applications, it has a max DC resistance of 0.02 ohm and can handle up to 5 A current rating.

PA2745NLT by Pulse Electronics is a Data Line Filter with 2 functions and 4 terminals. It offers an inductance of 130uH, rated current of 5A, and max operating temperature of 130°C. Ideal for applications requiring surface mount filters for data lines with high current demands.

Murata Manufacturing's BLM18HD601SN1D is a chip bead data line filter with 2 terminals, operating b/w -55 to 125°C. With dimensions of 1.6x0.8x0.8mm, it offers an output impedance of 600Ω and can handle frequencies from 100MHz to 1000MHz. Ideal for surface mount applications, this ferrite chip filter has a max DC resistance of 1.5Ω and rated current of 0.1A, making it suitable for noise suppression in electronic circuits.

Murata's BLM18AG221SN1D is a chip bead data line filter with 2 terminals, rated for 0.5A current and 220 ohm output impedance. It operates b/w -55°C to 125°C, suitable for surface mount applications in filtering frequencies from 100 MHz with dimensions of 1.6x0.8x0.8mm.