Image shown is a representation only.
| Manufacturer | C & K Components |
|---|---|
| Manufacturer's Part Number | 7105MD9AW4PE |
| Description | TOGGLE SWITCH; Mounting Feature: THROUGH HOLE-RIGHT ANGLE; Switch Function: SPDT; Type (Actuator): TOGGLE; Contact Function: (ON)-OFF-(ON); Material (Actuator): BRASS; |
| Datasheet | 7105MD9AW4PE Datasheet |
| NAME | DESCRIPTION |
|---|---|
| Center Contact Plating: | GOLD OVER NICKEL |
| Center Contact Material: | COPPER ALLOY |
| Type (Bushing): | 1/4-40 |
| Length (Bushing): | .35 inch |
| Housing Material: | STAINLESS STEEL |
| Type (Actuator): | TOGGLE |
| Terminal Finish: | Matte Tin (Sn) - with Nickel (Ni) barrier |
| Finish (Actuator): | BRIGHT CHROME |
| Switch Action: | MOMENTARY |
| Terminal Material: | COPPER ALLOY |
| Termination Type: | WIRE WRAP |
| Electrical Life: | 100000 Cycle(s) |
| Maximum Operating Temperature: | 85 Cel |
| Material (Actuator): | BRASS |
| Contact Resistance: | 10 mohm |
| Insulation Resistance: | 1000000000 ohm |
| Color (Actuator): | CHROME |
| End Contact Material: | COPPER ALLOY |
| Angle (Actuator): | 25 deg |
| Other Names: | 108-7105MD9AW4PE |
| Dielectric Withstand Volts (V): | 1000VRMS |
| Contact Function: | (ON)-OFF-(ON) |
| PCB Hole Count: | 5 |
| DC Maximum Power Rating R Load (Contact): | 0.4VA@20VDC |
| Switch Type: | TOGGLE SWITCH |
| Sealing: | EPOXY |
| JESD-609 Code: | e3 |
| Minimum Operating Temperature: | -30 Cel |
| Mounting Feature: | THROUGH HOLE-RIGHT ANGLE |
| Body Width: | 6.858 inch |
| Switch Function: | SPDT |
| Terminal Length: | .83 inch |
| Length (Actuator): | .2 inch |
| End Contact Plating: | GOLD OVER NICKEL |
| Body Height: | 12.7 mm |
| Body Length/Diameter: | 12.7 mm |
