7301K2AQE by C & K Components | Switches

Image shown is a representation only.

Manufacturer	C & K Components
Manufacturer's Part Number	7301K2AQE
Description	TOGGLE SWITCH; Mounting Feature: THROUGH HOLE-RIGHT ANGLE; Switch Function: 3PDT; Type (Actuator): LOCKING LEVER; Contact Function: ON-ON; Solderability: MIL-STD;
Datasheet	7301K2AQE Datasheet

NAME	DESCRIPTION
Maximum DC Contact Current:	5 A
Center Contact Plating:	SILVER
Center Contact Material:	COPPER ALLOY
Housing Material:	STAINLESS STEEL
Type (Actuator):	LOCKING LEVER
Maximum AC Contact Voltage:	120 V
Solderability:	MIL-STD
Terminal Finish:	SILVER
Finish (Actuator):	NATURAL ALUMINUM
Terminal Material:	COPPER ALLOY
Termination Type:	SOLDER
Electrical Life:	100000 Cycle(s)
Maximum Operating Temperature:	85 Cel
Material (Actuator):	BRASS
Contact Resistance:	10 mohm
Insulation Resistance:	1000000000 ohm
Maximum AC Contact Current:	5 A
End Contact Material:	COIN SILVER
Angle (Actuator):	25 deg
Maximum DC Contact Voltage:	28 V
DC Maximum Rating R Load (Contact):	5A@28VDC
Dielectric Withstand Volts (V):	1000VRMS
Contact Function:	ON-ON
PCB Hole Count:	9
Switch Type:	TOGGLE SWITCH
AC Maximum Rating R Load (Contact):	5A@120VAC
Sealing:	EPOXY
JESD-609 Code:	e4
Minimum Operating Temperature:	-30 Cel
Mounting Feature:	THROUGH HOLE-RIGHT ANGLE
Switch Function:	3PDT
Terminal Length:	.125 inch
Length (Actuator):	.634 inch
End Contact Plating:	SILVER

Popular Products

RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;

SZNUP2105LT1G by Onsemi is a Transient Suppression Device with 2 elements in a common anode configuration. It has a max non-repetitive peak reverse power dissipation of 350W and breakdown voltage of 29.1V. Ideal for applications requiring bidirectional polarity protection, such as automotive electronics and industrial equipment due to its AEC-Q101 compliance and high clamping voltage of 44V.

N-CHANNEL; Configuration: SEPARATE, 2 ELEMENTS WITH BUILT-IN DIODE; Surface Mount: YES; No. of Elements: 2; No. of Terminals: 6; Minimum DS Breakdown Voltage: 60 V;

Vishay Intertechnology's 1N4148WS is a single rectifier diode with a max forward voltage of 1V and output current of 0.15A. With a fast reverse recovery time of 0.004us, it operates up to 150°C. Ideal for applications requiring high-speed switching and low power consumption in surface mount configurations.

STM8S003F3P6TR by STMicroelectronics is an 8-bit microcontroller with a max clock frequency of 16 MHz. It features 1024 RAM bytes, 128 data EEPROM size, and 5-ch 10-bit ADC channels. Ideal for industrial applications requiring low power mode and connectivity via I2C, SPI, and UART interfaces.

RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;

ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Package Code: TO-220; Terminal Form: THROUGH-HOLE; JESD-609 Code: e3; Package Shape: RECTANGULAR;

TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

TE Connectivity's M24308/2-1F D-Sub Connector features 9 contacts, 2 rows, and a shell size of 1/E. With a rated current of 7.5A, it operates b/w -55°C to 125°C. Ideal for cable mounting applications, this connector has a steel shell with cadmium finish and uses crimp termination for female contact pins.