Image shown is a representation only.
| Manufacturer | C & K Components |
|---|---|
| Manufacturer's Part Number | 8121SD9AGE |
| Description | PUSHBUTTON SWITCH; Mounting Feature: THROUGH HOLE-RIGHT ANGLE; Switch Function: SPDT; Type (Actuator): PLUNGER; Solderability: MIL-STD; Housing Material: STAINLESS STEEL; |
| Datasheet | 8121SD9AGE Datasheet |
| NAME | DESCRIPTION |
|---|---|
| Maximum DC Contact Current: | 1 A |
| Center Contact Plating: | GOLD OVER NICKEL |
| Type (Bushing): | UNTHREADED |
| Length (Bushing): | .28 inch |
| Housing Material: | STAINLESS STEEL |
| Type (Actuator): | PLUNGER |
| Maximum AC Contact Voltage: | 120 V |
| Solderability: | MIL-STD |
| Terminal Finish: | GOLD OVER NICKEL |
| Actuator Travel (mm): | 5.7912 |
| Switch Action: | MOMENTARY |
| Terminal Material: | COPPER ALLOY |
| Termination Type: | SOLDER |
| Electrical Life: | 60000 Cycle(s) |
| Maximum Operating Temperature: | 75 Cel |
| Contact Resistance: | 100 mohm |
| Insulation Resistance: | 1000000000 ohm |
| Maximum AC Contact Current: | 1 A |
| Maximum DC Contact Voltage: | 28 V |
| DC Maximum Rating R Load (Contact): | 1A@28VDC |
| Dielectric Withstand Volts (V): | 1000VRMS |
| PCB Hole Count: | 3 |
| Switch Type: | PUSHBUTTON SWITCH |
| AC Maximum Rating R Load (Contact): | 1A@120VAC |
| Sealing: | EPOXY TERMINAL SEALED |
| JESD-609 Code: | e4 |
| Minimum Operating Temperature: | -30 Cel |
| Mounting Feature: | THROUGH HOLE-RIGHT ANGLE |
| Body Width: | 12.7 inch |
| Switch Function: | SPDT |
| Contact Timing: | BREAK-BEFORE-MAKE |
| Terminal Length: | .138 inch |
| End Contact Plating: | GOLD OVER NICKEL |
| Body Height: | 6.86 mm |
| Additional Features: | PANEL MOUNTABLE |
| Body Length/Diameter: | 12.7 mm |
| AC Maximum Power Rating R Load (Contact): | 0.4VA@20VAC |
