8532T1ZQE2 by C & K Components | Switches

Image shown is a representation only.

Manufacturer	C & K Components
Manufacturer's Part Number	8532T1ZQE2
Description	PUSHBUTTON SWITCH; Mounting Feature: PANEL MOUNT-THREADED; Switch Function: SPST; Type (Actuator): PLUNGER; Maximum AC Contact Current: 1 A; End Contact Plating: SILVER;
Datasheet	8532T1ZQE2 Datasheet

NAME	DESCRIPTION
Maximum DC Contact Current:	1 A
Center Contact Plating:	SILVER
Center Contact Material:	COIN SILVER
Length (Bushing):	.23 inch
Type (Actuator):	PLUNGER
Maximum AC Contact Voltage:	120 V
Terminal Finish:	SILVER
Actuator Travel (mm):	1.27
Switch Action:	MOMENTARY
Terminal Material:	COPPER ALLOY
Termination Type:	SOLDER
Electrical Life:	250000 Cycle(s)
Maximum Operating Temperature:	65 Cel
Contact Resistance:	30 mohm
Insulation Resistance:	1000000000 ohm
Color (Actuator):	BLACK
Maximum AC Contact Current:	1 A
End Contact Material:	COIN SILVER
Other Names:	CKN1121 *8532T1ZQE2 PTS645TL952LFS
Maximum DC Contact Voltage:	28 V
DC Maximum Rating R Load (Contact):	1A@28VDC
Dielectric Withstand Volts (V):	1000VRMS
Maximum Operating Force:	1.67 N
Switch Type:	PUSHBUTTON SWITCH
AC Maximum Rating R Load (Contact):	1A@120VAC
Sealing:	EPOXY TERMINAL SEALED
JESD-609 Code:	e4
Minimum Operating Temperature:	-30 Cel
Mounting Feature:	PANEL MOUNT-THREADED
Switch Function:	SPST
Length (Actuator):	.147 inch
End Contact Plating:	SILVER
Body Height:	8 mm
Body Length/Diameter:	9.53 mm
Diameter (Bushing):	.468 inch

Popular Products

MBR0520L-T1 by Won-top Electronics is a Schottky rectifier diode with 20V peak reverse voltage and 0.5A output current. It is a single-config, surface-mount diode in a small outline package, suitable for applications requiring high-speed switching and low forward voltage drop. Operating temperature range from -65°C to 125°C makes it ideal for various electronic circuits.

RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;

Other Regulators; No. of Terminals: 3; Operating Temperature (TJ-Min): 0 Cel; Terminal Pitch: 2.54 mm; Maximum Load Regulation (%): 1.5 %; Nominal Dropout Voltage-1: 3 V;

U.FL-R-SMT-1(10) by Hirose Electric is a RF connector with 50 ohm impedance, 0.05 dB insertion loss, and 8 GHz operating frequency. Ideal for board mounting in commercial applications, it features gold termination finish, liquid crystal polymer insulator, and 200VAC dielectric voltage resistance.

N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Peak Reflow Temperature (C): 260; Package Shape: RECTANGULAR;

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Yageo's RC0603JR-070RL is a SMT fixed resistor with 0 ohm resistance, rated for temperatures from -55 to 155 °C. Its metal glaze/thick film technology and 0.1 W power dissipation make it ideal for jumper applications in various electronic devices.

RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

NPN; Configuration: 8 BANKS, DARLINGTON WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: NO; Maximum Collector Current (IC): .5 A; No. of Elements: 8; Minimum DC Current Gain (hFE): 1000;