Image shown is a representation only.
| Manufacturer | C & K Components |
|---|---|
| Manufacturer's Part Number | 8732S1HZQE |
| Description | PUSHBUTTON SWITCH; Mounting Feature: PANEL MOUNT-THREADED; Switch Function: SPST; Type (Actuator): PLUNGER; Contact Function: OFF-(ON); Termination Type: SOLDER; |
| Datasheet | 8732S1HZQE Datasheet |
| NAME | DESCRIPTION |
|---|---|
| Maximum DC Contact Current: | 1 A |
| Center Contact Plating: | SILVER |
| Center Contact Material: | COIN SILVER |
| Type (Bushing): | 5/16-24 |
| Length (Bushing): | .25 inch |
| Type (Actuator): | PLUNGER |
| Maximum AC Contact Voltage: | 125 V |
| Terminal Finish: | SILVER |
| Actuator Travel (mm): | 8.89 |
| Switch Action: | MOMENTARY |
| Terminal Material: | COPPER ALLOY |
| Termination Type: | SOLDER |
| Electrical Life: | 100000 Cycle(s) |
| Maximum Operating Temperature: | 65 Cel |
| Contact Resistance: | 30 mohm |
| Insulation Resistance: | 1000 ohm |
| Maximum AC Contact Current: | 1 A |
| End Contact Material: | COIN SILVER |
| Angle (Actuator): | 0 deg |
| Maximum DC Contact Voltage: | 28 V |
| DC Maximum Rating R Load (Contact): | 1A@28VDC |
| Dielectric Withstand Volts (V): | 1000VRMS |
| Contact Function: | OFF-(ON) |
| Maximum Operating Force: | .61 N |
| Switch Type: | PUSHBUTTON SWITCH |
| AC Maximum Rating R Load (Contact): | 1A@125VAC |
| Sealing: | EPOXY TERMINAL SEALED |
| JESD-609 Code: | e4 |
| Minimum Operating Temperature: | -30 Cel |
| Mounting Feature: | PANEL MOUNT-THREADED |
| Switch Function: | SPST |
| Terminal Length: | .22 inch |
| Length (Actuator): | .39 inch |
| End Contact Plating: | SILVER |
| Insulator Material: | DIALLYL PHTHALATE |
| Body Height: | 20.08 mm |
| Additional Features: | ROHS COMPLIANT |
| Body Length/Diameter: | 9.53 mm |
