Image shown is a representation only.
| Manufacturer | C & K Components |
|---|---|
| Manufacturer's Part Number | E103MD1ABE |
| Description | TOGGLE SWITCH; Mounting Feature: THROUGH HOLE-RIGHT ANGLE; Switch Function: SPDT; Type (Actuator): TOGGLE; Solderability: MIL-STD; Body Length/Diameter: 12.7 mm; |
| Datasheet | E103MD1ABE Datasheet |
| NAME | DESCRIPTION |
|---|---|
| Maximum DC Contact Current: | .02 A |
| Center Contact Plating: | GOLD OVER NICKEL |
| Center Contact Material: | COPPER ALLOY |
| Length (Bushing): | .25 inch |
| Housing Material: | GLASS FILLED REINFORCED NYLON |
| Type (Actuator): | TOGGLE |
| Maximum AC Contact Voltage: | 20 V |
| Solderability: | MIL-STD |
| Terminal Finish: | GOLD OVER NICKEL |
| Finish (Actuator): | CHROME |
| Switch Action: | LATCHED |
| Terminal Material: | COPPER ALLOY |
| Termination Type: | SOLDER |
| Electrical Life: | 40000 Cycle(s) |
| Maximum Operating Temperature: | 85 Cel |
| Material (Actuator): | BRASS |
| Contact Resistance: | 10 mohm |
| Insulation Resistance: | 1000000000 ohm |
| Maximum AC Contact Current: | .02 A |
| End Contact Material: | COPPER ALLOY |
| Other Names: |
E103MD1ABE-ND 2266-E103MD1ABE CKN1520 *E103MD1ABE |
| Maximum DC Contact Voltage: | 20 V |
| DC Maximum Rating R Load (Contact): | .02A@20VDC |
| Dielectric Withstand Volts (V): | 1000VRMS |
| Switch Type: | TOGGLE SWITCH |
| AC Maximum Rating R Load (Contact): | .02A@20VAC |
| Sealing: | EPOXY TERMINAL SEALED |
| JESD-609 Code: | e4 |
| Minimum Operating Temperature: | -30 Cel |
| Mounting Feature: | THROUGH HOLE-RIGHT ANGLE |
| Body Width: | 12.7 inch |
| Switch Function: | SPDT |
| Length (Actuator): | .3 inch |
| End Contact Plating: | GOLD OVER NICKEL |
| Insulator Material: | GLASS FILLED NYLON |
| Body Height: | 6.6 mm |
| Body Length/Diameter: | 12.7 mm |
| AC Maximum Power Rating R Load (Contact): | 0.4VA@20VAC |
