Image shown is a representation only.
| Manufacturer | C & K Components |
|---|---|
| Manufacturer's Part Number | EP11SD1SAPE |
| Description | PUSHBUTTON SWITCH; Mounting Feature: SURFACE MOUNT-RIGHT ANGLE; Switch Function: SPST; Type (Actuator): PLUNGER; Solderability: MIL-STD; Body Length/Diameter: 8.128 mm; |
| Datasheet | EP11SD1SAPE Datasheet |
| NAME | DESCRIPTION |
|---|---|
| Maximum DC Contact Current: | .02 A |
| Center Contact Plating: | GOLD OVER NICKEL |
| Center Contact Material: | COPPER ALLOY |
| Length (Bushing): | .177 inch |
| Housing Material: | GLASS FILLED NYLON |
| Type (Actuator): | PLUNGER |
| Maximum AC Contact Voltage: | 20 V |
| Solderability: | MIL-STD |
| Terminal Finish: | MATTE TIN OVER NICKEL |
| Switch Action: | MOMENTARY |
| Terminal Material: | COPPER ALLOY |
| Termination Type: | SOLDER |
| Electrical Life: | 60000 Cycle(s) |
| Maximum Operating Temperature: | 85 Cel |
| Contact Resistance: | 20 mohm |
| Insulation Resistance: | 1000000000 ohm |
| Maximum AC Contact Current: | .02 A |
| End Contact Material: | COPPER ALLOY |
| Maximum DC Contact Voltage: | 20 V |
| DC Maximum Rating R Load (Contact): | .02A@20VDC |
| Dielectric Withstand Volts (V): | 1000VRMS |
| Packing Method: | TAPE AND REEL |
| Switch Type: | PUSHBUTTON SWITCH |
| AC Maximum Rating R Load (Contact): | .02A@20VAC |
| Sealing: | EPOXY TERMINAL SEALED |
| JESD-609 Code: | e3 |
| Minimum Operating Temperature: | -30 Cel |
| Mounting Feature: | SURFACE MOUNT-RIGHT ANGLE |
| Body Width: | 5.08 inch |
| Switch Function: | SPST |
| Length (Actuator): | .215 inch |
| End Contact Plating: | GOLD OVER NICKEL |
| Insulator Material: | GLASS FILLED NYLON |
| Body Height: | 9.652 mm |
| Additional Features: | ROHS COMPLIANT, TAPE/REEL PKG. |
| Body Length/Diameter: | 8.128 mm |
| AC Maximum Power Rating R Load (Contact): | 0.4VA@20VAC |
