HBS2KCF5ST011C by C & K Components | Switches

Image shown is a representation only.

Manufacturer	C & K Components
Manufacturer's Part Number	HBS2KCF5ST011C
Description	SNAP ACTING/LIMIT SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: SPDT; Type (Actuator): LEVER; Maximum Operating Force: 3.614 N; Body Width: 17.5 inch;
Datasheet	HBS2KCF5ST011C Datasheet

NAME	DESCRIPTION
Maximum DC Contact Current:	1 A
Housing Material:	PHENOLIC
Type (Actuator):	LEVER
Maximum AC Contact Voltage:	125 V
Terminal Finish:	TIN
Switch Action:	MOMENTARY
Terminal Material:	BRASS
Termination Type:	SCREW
Electrical Life:	150000 Cycle(s)
Maximum Operating Temperature:	150 Cel
Material (Actuator):	PHENOLIC
Insulation Resistance:	1000000000 ohm
Maximum AC Contact Current:	1 A
Maximum DC Contact Voltage:	30 V
DC Maximum Rating R Load (Contact):	1A@30VDC
Dielectric Withstand Volts (V):	1500VRMS
Maximum Operating Force:	3.614 N
Switch Type:	SNAP ACTING/LIMIT SWITCH
AC Maximum Rating R Load (Contact):	1A@125VAC
Sealing:	IP65
JESD-609 Code:	e3
Minimum Operating Temperature:	-55 Cel
Mounting Feature:	PANEL MOUNT
Body Width:	17.5 inch
Switch Function:	SPDT
Length (Actuator):	.045 inch
Insulator Material:	PHENOLIC
Body Height:	21.1 mm
Body Length/Diameter:	49.3 mm

Popular Products

RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;

LM555CM by Texas Instruments is an Analog Waveform Generation IC with a supply voltage range of 4.5V to 16V and max operating temperature of 70°C. It comes in a small outline package, suitable for applications requiring pulse generation or rectangular waveform outputs. With surface mount capability and low supply current of 15mA, it is ideal for commercial-grade electronic circuits.

KEMET C0603C104K5RACAUTO is a ceramic capacitor with 0.1uF capacitance, rated for 50V. It has X7R temperature characteristics, -55 to 125°C operating range, and ±10% tolerance. Ideal for automotive applications meeting AEC-Q200 standard, it comes in SMT package with matte tin finish and wraparound terminals.

RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;

NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .8 A; No. of Terminals: 3;

FDLL4148 by Onsemi is a single rectifier diode with a max reverse recovery time of 0.004 us. With a max forward voltage of 1V and output current of 0.2A, it is ideal for applications requiring fast switching speeds in electronic circuits. The diode's glass package body material and isolated case connection make it suitable for surface mount designs operating at temperatures up to 175°C.

TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;

RECTIFIER DIODE; Surface Mount: YES; Terminal Finish: Tin/Lead (Sn/Pb); Maximum Repetitive Peak Reverse Voltage: 70 V; Maximum Reverse Recovery Time: .006 us; Maximum Output Current: .1 A;

OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;