MB05L2NCGD by C & K Components | Switches

Image shown is a representation only.

Manufacturer	C & K Components
Manufacturer's Part Number	MB05L2NCGD
Description	ROTARY SWITCH; Mounting Feature: THROUGH HOLE-STRAIGHT; Switch Function: DP5T; Type (Actuator): SCREW DRIVER SLOT, FLUSH; Dielectric Withstand Volts (V): 600VRMS; Additional Features: PANEL MOUNTABLE;
Datasheet	MB05L2NCGD Datasheet

NAME	DESCRIPTION
Maximum DC Contact Current:	.25 A
No. of Positions:	5
Center Contact Plating:	SILVER
Center Contact Material:	COPPER ALLOY
Type (Bushing):	1/4-28
Length (Bushing):	.25 inch
Housing Material:	ZINC ALLOY
Type (Actuator):	SCREW DRIVER SLOT, FLUSH
Maximum AC Contact Voltage:	125 V
Terminal Finish:	GOLD OVER NICKEL
Switch Action:	LATCHED
Terminal Material:	COPPER ALLOY
Termination Type:	SOLDER
Electrical Life:	10000 Cycle(s)
Maximum Operating Temperature:	85 Cel
Material (Actuator):	ZINC ALLOY
Contact Resistance:	20 mohm
Insulation Resistance:	10000000000 ohm
Maximum AC Contact Current:	.25 A
End Contact Material:	COPPER ALLOY
No. of Switch Sections:	1
Maximum DC Contact Voltage:	28 V
DC Maximum Rating R Load (Contact):	.25A@28VDC
Dielectric Withstand Volts (V):	600VRMS
PCB Hole Count:	12
Switch Type:	ROTARY SWITCH
AC Maximum Rating R Load (Contact):	.25A@125VAC
Indexing Angle:	36 deg
JESD-609 Code:	e4
Minimum Operating Temperature:	-30 Cel
Mounting Feature:	THROUGH HOLE-STRAIGHT
Switch Function:	DP5T
Contact Timing:	MAKE-BEFORE-BREAK
End Contact Plating:	SILVER
Insulator Material:	DIALLYL PHTHALATE
Body Height:	9.4 mm
Additional Features:	PANEL MOUNTABLE
Body Length/Diameter:	13.34 mm

Popular Products

NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .8 A; No. of Terminals: 3;

TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Maximum Collector Current (IC): .6 A; No. of Terminals: 3;

CONNECTOR ACCESSORY; MIL-Connector Accessory Name: CONTACT; DIN Conformity: NO; National Stock Number (NSN): 5999004733551; Mating Contacts: M39029/56-348, M39029/57-354; Contact Type: CRIMP REAR RELEASE;

The Yageo RC0402FR-071KL is a fixed resistor with a resistance of 1000 ohm and a tolerance of 1%. It is suitable for surface mount applications and has a max operating temperature of 155 °C.

Diodes Inc. BSS84-7-F is a P-channel FET with 50V DS breakdown voltage, 0.13A max drain current, and 10 ohm RDS(on). Ideal for switching applications, it features a single configuration with built-in diode in a small outline package. Operating in enhancement mode at up to 150°C, it has Gull Wing terminals and matte tin finish.

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;

TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

PULSE; RECTANGULAR; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;

IRLML6402TRPBF by Infineon is a P-CHANNEL FET for SWITCHING applications. It features a 20V DS Breakdown Voltage, 22A IDM, and 0.065 ohm RDS(on). With a small outline package and matte tin finish, it operates in temperatures from -55 to 150 °C.