ZMCHM9L3T by C & K Components | Switches

Image shown is a representation only.

Manufacturer	C & K Components
Manufacturer's Part Number	ZMCHM9L3T
Description	SNAP ACTING/LIMIT SWITCH; Mounting Feature: THROUGH HOLE-STRAIGHT; Switch Function: SPDT; Type (Actuator): LEAF; Manufacturer Series: ZM; Body Length/Diameter: 12.8 mm;
Datasheet	ZMCHM9L3T Datasheet

NAME	DESCRIPTION
Operating Position:	.33 inch
Maximum DC Contact Current:	.2 A
Housing Material:	NYLON
Type (Actuator):	LEAF
Maximum AC Contact Voltage:	125 V
Terminal Finish:	Silver (Ag)
Switch Action:	MOMENTARY
Terminal Material:	BRASS
Termination Type:	SOLDER
Electrical Life:	15000 Cycle(s)
Maximum Operating Temperature:	85 Cel
Manufacturer Series:	ZM
Material (Actuator):	NYLON
Insulation Resistance:	100000000 ohm
Maximum AC Contact Current:	.1 A
Maximum DC Contact Voltage:	60 V
DC Maximum Rating R Load (Contact):	.2A@60VDC
Dielectric Withstand Volts (V):	1000VRMS
PCB Hole Count:	3
Maximum Operating Force:	.88 N
Switch Type:	SNAP ACTING/LIMIT SWITCH
AC Maximum Rating R Load (Contact):	0.1A@125VAC
JESD-609 Code:	e4
Minimum Operating Temperature:	-30 Cel
Mounting Feature:	THROUGH HOLE-STRAIGHT
Body Width:	5.8 inch
Switch Function:	SPDT
Contact Timing:	SNAP ACTION
Terminal Length:	.138 inch
Body Height:	6.6 mm
Body Length/Diameter:	12.8 mm

Popular Products

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;

N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .35 W; Maximum Drain Current (ID): .2 A; Transistor Application: SWITCHING;

2N7002,215 by NXP Semiconductors is a small signal N-CHANNEL FET with a min DS breakdown voltage of 60V and max drain current of 0.3A. It is used for switching applications in enhancement mode, operates b/w -65 to 150 °C, and has a max power dissipation of 0.2W.

NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Maximum Collector Current (IC): .6 A; Maximum Time At Peak Reflow Temperature (s): 10;

P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .35 W; Moisture Sensitivity Level (MSL): 1; Maximum Drain Current (ID): .46 A;

MMBT2222ALT1G by Onsemi is a NPN BJT transistor with 3 terminals, max power dissipation of 0.3W, and hFE of 75. Ideal for switching applications, it operates b/w -55 to 150 °C with a max collector-emitter voltage of 40V. This surface-mount device has a transition frequency of 300MHz and turn-on time of 35ns.

OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;

RECTIFIER DIODE; Surface Mount: NO; Maximum Output Current: .15 A; Maximum Reverse Recovery Time: .004 us; Maximum Operating Temperature: 200 Cel; No. of Phases: 1;

TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

LM358N by Texas Instruments is an operational amplifier with 2 functions, offering a max input offset voltage of 9000 uV and a nominal common mode reject ratio of 85 dB. Widely used in commercial applications, it operates at temperatures ranging from 0 to 70 °C and has a unity gain bandwidth of 1000 kHz.