V2B2AJ01-1AZMG-1XX-XWW1 by Carling Technologies | Switches

Image shown is a representation only.

Manufacturer	Carling Technologies
Manufacturer's Part Number	V2B2AJ01-1AZMG-1XX-XWW1
Description	ROCKER SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: SPST; Type (Actuator): ROCKER; Contact Function: (ON)-OFF; Maximum DC Contact Current: 15 A;
Datasheet	V2B2AJ01-1AZMG-1XX-XWW1 Datasheet

NAME	DESCRIPTION
Maximum DC Contact Current:	15 A
Maximum DC Contact Voltage:	28 V
DC Maximum Rating R Load (Contact):	15A@28VDC
Dielectric Withstand Volts (V):	1500VRMS
Contact Function:	(ON)-OFF
Type (Actuator):	ROCKER
Switch Type:	ROCKER SWITCH
Minimum Operating Temperature:	-40 Cel
Mounting Feature:	PANEL MOUNT
Body Width:	20.828 inch
Switch Action:	MAINTAINED
Switch Function:	SPST
Termination Type:	QUICK CONNECT
Terminal Length:	.4 inch
Insulator Material:	POLYESTER
Illumination:	LED
Body Height:	27.4066 mm
Maximum Operating Temperature:	85 Cel
Contact Resistance:	10 mohm
Insulation Resistance:	50000000 ohm

Popular Products

OPA2227UA by Texas Instruments is a dual operational amplifier with low-offset voltage of 200 uV and bias current of 0.01 uA. It operates at temperatures ranging from -40 to 85 °C, making it suitable for industrial applications requiring precise signal amplification. With a unity gain bandwidth of 8000 kHz, this op amp is ideal for high-frequency circuit designs.

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

U.FL-R-SMT-1(10) by Hirose Electric is a RF connector with 50 ohm impedance, 0.05 dB insertion loss, and 8 GHz operating frequency. Ideal for board mounting in commercial applications, it features gold termination finish, liquid crystal polymer insulator, and 200VAC dielectric voltage resistance.

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;

MBRS3200T3G by Onsemi is a Schottky rectifier diode with a max output current of 3A and a max forward voltage of 0.59V. It operates in temperatures ranging from -65°C to 175°C, making it suitable for power applications. The diode has a peak repetitive reverse voltage of 200V and is designed for surface mount installation in electronic circuits.

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;

LP2950CDT-3.3G by Onsemi is a fixed positive single output LDO regulator with a nominal output voltage of 3.3V and max output current of 0.1A. It has a small outline package style, operates at temperatures ranging from -40 to 125 °C, and is suitable for applications requiring low dropout voltage and precise voltage regulation in electronic circuits.

TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Maximum Clamping Voltage: 29.2 V; Nominal Breakdown Voltage: 21.1 V; Polarity: BIDIRECTIONAL; Maximum Repetitive Peak Reverse Voltage: 18 V;

N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Operating Mode: ENHANCEMENT MODE; Maximum Operating Temperature: 150 Cel; Terminal Form: GULL WING;

FIXED POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Terminal Form: THROUGH-HOLE; Maximum Voltage Tolerance: 5 %; Operating Temperature (TJ-Max): 125 Cel; Maximum Output Voltage-1: 5.25 V;