CS11028.0F160 by Cit Relay & Switch | Switches

Image shown is a representation only.

Manufacturer	Cit Relay & Switch
Manufacturer's Part Number	CS11028.0F160
Description	KEYPAD SWITCH; Mounting Feature: SURFACE MOUNT-STRAIGHT; Switch Function: SPST; Insulation Resistance: 100000000 ohm; No. of Switches: 1; Packing Method: TAPE AND REEL;
Datasheet	CS11028.0F160 Datasheet

NAME	DESCRIPTION
Maximum DC Contact Current:	.05 A
Center Contact Plating:	SILVER
Center Contact Material:	PHOSPHOR BRONZE
Housing Material:	NYLON
Actuator Travel (mm):	0.25
Switch Action:	MOMENTARY-TACTILE
Terminal Material:	BRASS
Termination Type:	SOLDER
Electrical Life:	100000 Cycle(s)
Maximum Operating Temperature:	85 Cel
Material (Actuator):	NYLON
Contact Resistance:	50 mohm
Insulation Resistance:	100000000 ohm
End Contact Material:	PHOSPHOR BRONZE
Maximum DC Contact Voltage:	50 V
DC Maximum Rating R Load (Contact):	0.05A@50VDC
Dielectric Withstand Volts (V):	250VRMS
Maximum Operating Force:	1.57 N
Packing Method:	TAPE AND REEL
Switch Type:	KEYPAD SWITCH
Minimum Operating Temperature:	-40 Cel
Mounting Feature:	SURFACE MOUNT-STRAIGHT
Body Width:	6 inch
Switch Function:	SPST
Circuit Config:	1X1
End Contact Plating:	SILVER
Body Height:	3.5 mm
Body Length/Diameter:	6 mm
No. of Switches:	1

Popular Products

STM32H743XIH6 by STMicroelectronics is a 32-bit microcontroller with Cortex-M7 CPU, 36-Ch 16-Bit ADC, and 2-Ch 12-Bit DAC. It operates at up to 48 MHz, has 1085440 bytes of RAM, and offers connectivity options like CAN, I2C, USB. Ideal for industrial applications requiring high-performance processing and extensive peripheral support.

TEMPERATURE SENSOR,SWITCH/DIGITAL OUTPUT,SERIAL; Mounting Feature: SURFACE MOUNT; No. of Terminals: 3; Package Shape or Style: ROUND; Housing: PLASTIC; Output Interface Type: 1-WIRE INTERFACE;

AT90CAN128-16AU by Microchip Technology is a microcontroller with 8-bit data RAM and 16-bit address bus width. It operates at a max clock frequency of 16 MHz, making it suitable for industrial applications requiring low power mode and connectivity options like CAN, SPI, and USART. With 53 I/O lines and 8-channel 10-bit ADCs, this microcontroller offers versatile peripheral support for various embedded systems.

RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;

FTDI's FT232RL-REEL is a bus controller with 28 terminals, operating at 3.3V to 5.25V. It supports USB, VBUS, and UART buses with a data transfer rate of 60MBps. Ideal for industrial applications due to its CMOS technology and compatibility with RS232, RS422, and RS485 standards.

ULN2803ADW by Texas Instruments is a peripheral driver with 8 functions, open-collector output characteristics, and built-in transient protections. It operates b/w -40 to 85 °C and has a max supply voltage of 3 V. Ideal for applications requiring buffer or inverter-based peripheral drivers with sink current flow direction.

RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;

RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;

N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .35 W; Transistor Application: SWITCHING; JESD-609 Code: e3;