Coilcraft - MSD1514-103MED

BK1608TS102-T by Taiyo Yuden is a chip bead data line filter with 2 terminals, ideal for surface mount applications. Featuring a ferrite chip construction, it offers a max operating temperature of 125°C and a min frequency of 100 MHz. With dimensions of L1.6xB0.8xH0.8 (mm), this filter has an output impedance of 1000 ohm and is suitable for various electronic devices requiring noise suppression in the range of 100 MHz.

BK2125LM182-TV by Taiyo Yuden is a FERRITE CHIP filter with 2 terminals, rated for 0.3A current. With dimensions of L2.0XB1.25XH1.25 (mm), it has an output impedance of 1800 OHM and max DC resistance of 0.45 ohm. Ideal for data line filtering applications due to its compact size and surface mounting type.

Murata Manufacturing's NFE61HT102F2A9L is a Data Line Filter with 1000 Mohm Min Insulation Resistance, AEC-Q200 Screening Level, and 100 V Rated Voltage. It is ideal for applications requiring noise suppression in data lines, offering a compact size of L6.8xB1.6xH1.6 mm and rated current of 2 A.

Wurth Elektronik 7427927121 is a FERRITE CHIP filter with 2 terminals, rated for 0.5A current. With dimensions of L1.0XB0.5XH0.5 (mm), it operates b/w -55 to 125 °C and has a max DC resistance of 0.8 ohm. Ideal for data line filtering applications due to its surface mounting type and output impedance of 220 OHM.

TDK ACP3225-102-2P-T000 is a FERRITE CHIP filter with 2 functions, rated at 60V and 1.5A. With dimensions of L3.2xB2.5xH1.9 (mm), it's ideal for data line filtering applications requiring high impedance and insulation resistance up to 10 Mohm. Operating b/w -40°C to 85°C, this surface mount device offers low DC resistance of 0.1 ohm for efficient performance in various electronic systems.

BK1608HS220-T by Taiyo Yuden is a chip bead data line filter with 2 terminals, ideal for applications requiring noise suppression. With a max operating temperature of 125°C and min frequency of 100 MHz, it offers low DC resistance of 0.05 ohm. This ferrite chip filter has dimensions of L1.6xB0.8xH0.8 (mm) and is suitable for surface mounting type in tape and reel packing method.

Murata Manufacturing's NFE61HT332Z2A9L is a DATA LINE FILTER with 100V rated voltage, 3300uF capacitance, and 2A rated current. It is used in automotive applications due to AEC-Q200 screening level and operates b/w -55°C to 125°C temperature range.

MMZ2012R601AT000 by TDK is an 0805 chip bead data line filter with a max operating temperature of 125°C and min of -55°C. With dimensions of L2.0xB1.25xH0.85 mm, it has a max DC resistance of 0.2 ohm and output impedance of 600 ohm, suitable for surface mount applications in electronics for noise suppression and signal filtering purposes.

The TDK MMZ2012Y202B is a chip bead data line filter with FERRITE CHIP technology. It has 2 terminals, matte tin finish, and dimensions of L2.0xB1.25xH0.85 (mm). With a max operating temperature of 125°C and rated current of 0.4A, it is ideal for surface mount applications requiring an output impedance of 2000 ohm.

STMicroelectronics KBMF01SC6 is a DATA LINE FILTER with 2 functions and 5 terminals. It has a max operating temperature of 70°C, DC resistance of 39 ohm, and capacitance of 120 uF. Ideal for IEC-approved applications requiring surface mount filters in compact dimensions L3.05xB1.75xH1.45 mm.

TDK's MPZ1608S601ATA00 is a 0603 chip bead data line filter with 2 terminals. It operates b/w -55 to 125°C, has a DC resistance of 0.15 ohm, and output impedance of 600 OHM. Ideal for surface mount applications in filtering data lines up to 100 MHz frequency range.

ACM2012-201-2P-T002 by TDK is a FERRITE CHIP data line filter with 2 functions. It has a rated voltage of 50V and can operate in temperatures ranging from -40 to 85°C. It is suitable for surface mount applications requiring a compact size (L2.0XB1.2XH1.3 mm) and offers a min insulation resistance of 10 Mohm.

Murata Manufacturing's BLM31PG601SN1 is a FERRITE CHIP filter with 2 terminals, rated for 1.5A current and 600Ω output impedance. With dimensions of L3.2xB1.6xH1.1 mm, it operates b/w -55°C to 125°C, ideal for data line filtering in surface mount applications.

BLM15AX100SN1D by Murata is a chip bead data line filter with 2 terminals, rated current of 1.74A, and max operating temp of 125°C. It has a ferrite chip construction, DC resistance of 0.015 ohm, and output impedance of 10 ohm. Ideal for surface mount applications in electronics to suppress noise interference at frequencies ranging from 100 MHz.

TDK's MMZ1608Y601BTA00 is a 0603 chip bead data line filter with 2 terminals. Featuring ferrite chip construction, it has a max operating temp of 125°C and min of -55°C. With dimensions of L1.6xB0.8xH0.8 mm, it offers an output impedance of 600 ohm and rated current of 0.5 A, ideal for surface mount applications in electronics.

TDK B82790-S513-N201 is a 2-function data line filter with 80V rated voltage and 51uH inductance. Ideal for applications requiring a compact surface-mount solution, it offers low DC resistance of 0.14 ohm and output impedance of 50 ohm.

The TDK MPZ2012S601ATD25 is a FERRITE CHIP data line filter with 2 terminals. It has a max operating temperature of 125°C and min of -55°C. With dimensions of L2.0XB1.25XH0.85 (mm), it is ideal for surface mount applications requiring an output impedance of 600 OHM at a rated current of 2 A.

The TDK ACM2012-900-2P-TL is a Data Line Filter with 2 functions, rated voltage of 50V, and max operating temperature of 85°C. It has 4 terminals, DC resistance of 0.19 ohm, and output impedance of 90 ohm. Ideal for surface mount applications in electronics to filter data lines efficiently.

CM3440Z171R-10 by Laird Technologies is a data line filter with 2 functions and 4 terminals. It has a max DC resistance of 0.001 ohm and can handle a rated current of 20 A. This surface mount filter is suitable for applications requiring noise suppression in data lines.

The TDK MPZ1608S181ATAH0 is a 5V FERRITE CHIP data line filter with 2 terminals. It has a max operating temperature of 125°C and min of -55°C. With dimensions of L1.6xB0.8xH0.8 (mm), it is ideal for surface mount applications in electronics requiring an output impedance of 180 ohms at a rated current of 2A.