3570.1339.053 by Comus International | Relays

Image shown is a representation only.

Manufacturer	Comus International
Manufacturer's Part Number	3570.1339.053
Description	DRY REED RELAY; Mounting Feature: THROUGH HOLE-STRAIGHT MOUNT; Relay Action: MBB; Relay Function: SPST; Coil or Input Supply Type: DC; Body Length/Diameter: 19 mm;
Datasheet	3570.1339.053 Datasheet

NAME	DESCRIPTION
Nominal Coil Voltage:	5 V
Maximum DC Contact Current:	1 A
Relay Function:	SPST
DC Coil Release Voltage:	800 mV
Contact or Output Supply Type:	DC
Maximum Contact DC Rating (R Load):	1A@200VDC
Relay Type:	Dry Reed Relay
No. of Terminals:	4
Coil or Input Supply Type:	DC
Relay Form:	1 Form A
Termination Type:	Solder
Operate Time:	350 µs
Electrical Life:	1000000000 Cycle(s)
DC Coil Operate Voltage:	3.75 V
Release Time:	100 µs
Maximum Operating Temperature:	85 °C (185 °F)
Contact Resistance:	150 mΩ
Insulation Resistance:	1000 GΩ
Input Switching Control Type:	Random
Maximum DC Coil Current:	10 mA
End Contact Material:	Ruthenium
Maximum DC Contact Voltage:	200 V
Coil Resistance:	500 Ω
Minimum Operating Temperature:	-40 °C (-40 °F)
Mounting Feature:	Through Hole-Straight Mount
Relay Action:	MBB
Body Width:	5.08 in (129.032 mm)
Maximum DC Coil Voltage:	7 V
Terminal Length:	0.126 in (3.2 mm)
Physical Dimension:	0.748 x 0.2 x 0.303 in (19 x 5.08 x 7.7 mm)
Additional Features:	With Diode
Body Height:	0.303 in (7.7 mm)
Body Length/Diameter:	0.748 in (19 mm)
Coil Power (mW):	50 mW

Popular Products

OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Code: TO-99; Package Shape: ROUND;

OPA2227UA by Texas Instruments is a dual operational amplifier with low-offset voltage of 200 uV and bias current of 0.01 uA. It operates at temperatures ranging from -40 to 85 °C, making it suitable for industrial applications requiring precise signal amplification. With a unity gain bandwidth of 8000 kHz, this op amp is ideal for high-frequency circuit designs.

NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Transistor Application: SWITCHING; Transistor Element Material: SILICON;

RECTIFIER DIODE; Surface Mount: YES; Technology: SCHOTTKY; No. of Phases: 1; Config: SINGLE; Maximum Operating Temperature: 125 Cel;

NXP Semiconductors' BSS138BKW,115 is a N-CHANNEL FET with 60V DS breakdown voltage and 0.32A ID. Ideal for SWITCHING applications, it features a built-in diode, 1.6 ohm RDS(on), and operates in ENHANCEMENT MODE. Suitable for surface mount with GULL WING terminals, it meets AEC-Q101 standards.

N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; JESD-30 Code: R-PDSO-G3; Maximum Time At Peak Reflow Temperature (s): NOT SPECIFIED; Operating Mode: ENHANCEMENT MODE;

RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;

N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Terminal Finish: TIN; No. of Terminals: 3; Additional Features: LOGIC LEVEL COMPATIBLE;

Diodes Inc. BAV99-7-F is a series-connected, center tap diode with 2 elements in a small outline package. It has a max reverse recovery time of 0.004 us and can handle up to 0.3A output current. Ideal for rectification applications requiring fast switching and low reverse current requirements.

STM32H753BIT6 by STMicroelectronics is a 32-bit microcontroller with 208 terminals, operating at up to 48 MHz. It features 20-Ch 16-Bit ADCs, 2-Ch 12-Bit DACs, and extensive peripherals for industrial applications like CAN, Ethernet, and USB connectivity. With a wide temperature range of -40 to +85 °C, it's ideal for demanding environments requiring high-speed processing capabilities.