2911-05-321 by Coto Technology | Relays

Image shown is a representation only.

Manufacturer	Coto Technology
Manufacturer's Part Number	2911-05-321
Description	DRY REED RELAY; Mounting Feature: THROUGH HOLE-STRAIGHT MOUNT; Relay Action: MOMENTARY; Relay Function: SPDT; Coil or Input Supply Type: DC; Maximum Contact AC Rating (R Load): .25A@150VAC;
Datasheet	2911-05-321 Datasheet

NAME	DESCRIPTION
Nominal Coil Voltage:	5 V
Maximum DC Contact Current:	250 mA
Relay Function:	SPDT
DC Coil Release Voltage:	400 mV
Maximum AC Contact Voltage:	150 V
Dielectric Strength Between Open Contacts:	200 Vrms
Contact or Output Supply Type:	AC/DC
Maximum Contact DC Rating (R Load):	0.25A@150VDC
Terminal Finish:	Matte Tin
Relay Type:	Dry Reed Relay
No. of Terminals:	8
Coil or Input Supply Type:	DC
Relay Form:	1 Form C
Termination Type:	Solder
Operate Time:	1 ms
Electrical Life:	100000000 Cycle(s)
DC Coil Operate Voltage:	3.8 V
Release Time:	2 ms
Maximum Operating Temperature:	85 °C (185 °F)
Insulation Resistance:	100 GΩ
Input Switching Control Type:	Random
Maximum DC Coil Current:	22 mA
Maximum AC Contact Current:	250 mA
Maximum DC Contact Voltage:	150 V
PCB Hole Count:	8
Maximum Contact DC Power Rating (R Load):	3W@150VDC
Coil Resistance:	230 Ω
JESD-609 Code:	e3
Sealing:	Hermetically Sealed
Minimum Operating Temperature:	-20 °C (-4 °F)
Mounting Feature:	Through Hole-Straight Mount
Relay Action:	Momentary
Body Width:	6.35 in (161.29 mm)
Maximum DC Coil Voltage:	5 V
Dielectric Strength Between Coil & Contacts:	1.5 kVrms
Terminal Length:	0.1063 in (2.7 mm)
Physical Dimension:	0.82 x 0.25 x 0.28 in (20.82 x 6.35 x 7.11 mm)
Additional Features:	Shielded
Body Height:	0.28 in (7.11 mm)
Body Length/Diameter:	0.82 in (20.82 mm)
Coil Power (mW):	110 mW
Maximum Contact AC Rating (R Load):	0.25A@150VAC

Popular Products

N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Maximum Drain Current (ID): .115 A; Operating Mode: ENHANCEMENT MODE;

RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;

BSS138DW-7-F by Diodes Incorporated is a N-channel small signal FET with a min DS breakdown voltage of 50V. It is used for switching applications and operates in enhancement mode. This surface mount transistor has a max drain current of 0.2A and a max power dissipation of 0.2W.

RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;

RECTIFIER DIODE; Surface Mount: NO; Maximum Output Current: .15 A; Maximum Operating Temperature: 200 Cel; Config: SINGLE; Terminal Finish: Tin/Lead (Sn/Pb);

FTDI's FT232RL-REEL is a bus controller with 28 terminals, operating at 3.3V to 5.25V. It supports USB, VBUS, and UART buses with a data transfer rate of 60MBps. Ideal for industrial applications due to its CMOS technology and compatibility with RS232, RS422, and RS485 standards.

OPA2277UA/2K5 by Texas Instruments is a dual operational amplifier with low offset voltage of 100 uV and micropower consumption of 0.004 uA. Ideal for industrial applications, it offers high common mode rejection ratio of 140 dB and unity gain bandwidth of 1 MHz. With a compact rectangular package style, it is suitable for surface mount designs in various electronic systems.

Vishay Intertechnology's CRCW06031K00FKEAHP is a fixed resistor with 1000 ohm resistance, 1% tolerance, and 0.33 W power dissipation. Ideal for surface mount applications in automotive electronics due to AEC-Q200 standard compliance and operating voltage of 75 V.

N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .83 W; JESD-609 Code: e3; Minimum DS Breakdown Voltage: 60 V;

OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Shape: ROUND; Maximum Bias Current (IIB) @25C: .075 uA;