TS03-66-95-BK-260-LCR-D-67 by CUI Devices | Switches

Image shown is a representation only.

Manufacturer	CUI Devices
Manufacturer's Part Number	TS03-66-95-BK-260-LCR-D-67
Description	KEYPAD SWITCH; Mounting Feature: THROUGH HOLE-STRAIGHT; Switch Function: SPST; Type (Actuator): STEM; Contact Function: OFF-(ON); Solderability: HAND/WAVE;
Datasheet	TS03-66-95-BK-260-LCR-D-67 Datasheet

NAME	DESCRIPTION
Maximum DC Contact Current:	.05 A
Center Contact Plating:	SILVER
Center Contact Material:	STAINLESS STEEL
Housing Material:	POLYAMIDE66
Body Color:	BLACK
Type (Actuator):	STEM
Solderability:	HAND/WAVE
Actuator Travel (mm):	0.35
Switch Action:	MOMENTARY-TACTILE
Terminal Material:	BRASS
Termination Type:	SOLDER
Electrical Life:	60000 Cycle(s)
Maximum Operating Temperature:	80 Cel
Material (Actuator):	PA66
Contact Resistance:	100 mohm
Insulation Resistance:	100000000 ohm
Color (Actuator):	YELLOW
End Contact Material:	STAINLESS STEEL
Maximum DC Contact Voltage:	12 V
DC Maximum Rating R Load (Contact):	0.05A@12VDC
Dielectric Withstand Volts (V):	250VAC
Contact Function:	OFF-(ON)
PCB Hole Count:	4
Maximum Operating Force:	2.55 N
Packing Method:	BAG; BOX
Switch Type:	KEYPAD SWITCH
Sealing:	IP67
Minimum Operating Temperature:	-30 Cel
Mounting Feature:	THROUGH HOLE-STRAIGHT
Body Width:	6.1 inch
Switch Function:	SPST
Circuit Config:	1X1
Terminal Length:	.118 inch
End Contact Plating:	SILVER
Insulator Material:	PA66
Body Height:	3.7 mm
Body Length/Diameter:	6.1 mm
No. of Switches:	1

Popular Products

RECTIFIER DIODE; Surface Mount: YES; Maximum Forward Voltage (VF): 1.3 V; Maximum Output Current: .1 A; Terminal Finish: Tin/Lead (Sn/Pb); Maximum Operating Temperature: 175 Cel;

TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

INTERFACE CIRCUIT; Temperature Grade: INDUSTRIAL; Terminal Form: NO LEAD; No. of Terminals: 32; Package Code: HVQCCN; Package Shape: SQUARE;

BSS138NH6327XTSA2 by Infineon is a N-CHANNEL FET with 60V DS Breakdown Voltage, ideal for small signal applications. Operating in Enhancement Mode, it has 0.36W Power Dissipation and 3.5 ohm Drain-Source Resistance. With Gull Wing terminals and AEC-Q101 reference standard, it's suitable for automotive electronics due to its high temperature range of -55 to 150 °C.

NPN; Configuration: COMPLEX; Surface Mount: NO; Maximum Collector Current (IC): .5 A; Package Body Material: PLASTIC/EPOXY; JESD-30 Code: R-PDIP-T18;

IRLML6402TRPBF by Infineon is a P-CHANNEL FET for SWITCHING applications. It features a 20V DS Breakdown Voltage, 22A IDM, and 0.065 ohm RDS(on). With a small outline package and matte tin finish, it operates in temperatures from -55 to 150 °C.

MMSZ5245BT1G by Onsemi is a Zener diode with 15V nominal reference voltage, 8.5mA test current, and 16 ohm dynamic impedance. It is used in applications requiring precise voltage regulation in a compact SMD package for temperatures ranging from -55 to 150°C.

LM317T by Texas Instruments is an adjustable positive single output standard regulator with a max output voltage of 37V and max input-output voltage differential of 40V. Operating temperature ranges from 0 to 125°C, making it suitable for various applications requiring precise voltage regulation in electronic circuits. With a max output current of 1.5A, this through-hole package regulator is ideal for power supply designs where adjustable voltage levels are needed.

The Microchip Technology PIC18F4550T-I/PT microcontroller operates at a max clock frequency of 48 MHz with 8-bit architecture. It features 13-Ch 10-Bit ADC channels and USB connectivity, making it suitable for industrial applications requiring high-speed data processing and analog-to-digital conversion. With low power mode and flash ROM programmability, this device offers efficient performance in compact designs.

N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Maximum Operating Temperature: 150 Cel; Operating Mode: ENHANCEMENT MODE;