D3V3S1U2LP1610Q-7 by Diodes Incorporated | Diodes

Image shown is a representation only.

Manufacturer	Diodes Incorporated
Manufacturer's Part Number	D3V3S1U2LP1610Q-7
Description	TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: BOTTOM; Terminal Form: NO LEAD; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Datasheet	D3V3S1U2LP1610Q-7 Datasheet

NAME	DESCRIPTION
Package Body Material:	PLASTIC/EPOXY
Config:	SINGLE
Diode Type:	TRANS VOLTAGE SUPPRESSOR DIODE
Surface Mount:	YES
Terminal Finish:	NICKEL PALLADIUM GOLD
Maximum Reverse Current:	1 uA
No. of Terminals:	2
Terminal Position:	BOTTOM
Package Style (Meter):	CHIP CARRIER
Technology:	AVALANCHE
JESD-30 Code:	R-PBCC-N2
Minimum Breakdown Voltage:	3.8 V
No. of Elements:	1
Package Shape:	RECTANGULAR
Terminal Form:	NO LEAD
Polarity:	UNIDIRECTIONAL
Maximum Operating Temperature:	150 Cel
Reverse Test Voltage:	3.3 V
Maximum Repetitive Peak Reverse Voltage:	3.3 V
Maximum Clamping Voltage:	11.5 V
JESD-609 Code:	e4
Minimum Operating Temperature:	-55 Cel
Diode Element Material:	SILICON
Maximum Power Dissipation:	.3 W
Reference Standard:	AEC-Q101; IATF 16949; IEC-61000-4-2

Popular Products

TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Maximum Repetitive Peak Reverse Voltage: 18 V; Nominal Breakdown Voltage: 21.05 V; Polarity: BIDIRECTIONAL; Maximum Clamping Voltage: 29.2 V;

FTDI's FT232RL-REEL is a bus controller with 28 terminals, operating at 3.3V to 5.25V. It supports USB, VBUS, and UART buses with a data transfer rate of 60MBps. Ideal for industrial applications due to its CMOS technology and compatibility with RS232, RS422, and RS485 standards.

The Microchip Technology PIC18F4550T-I/PT microcontroller operates at a max clock frequency of 48 MHz with 8-bit architecture. It features 13-Ch 10-Bit ADC channels and USB connectivity, making it suitable for industrial applications requiring high-speed data processing and analog-to-digital conversion. With low power mode and flash ROM programmability, this device offers efficient performance in compact designs.

TE Connectivity's CRGCQ0805F10R is a 10 ohm fixed resistor with 1% tolerance and 400 ppm/°C temperature coefficient. It is a surface mount thick film resistor in an 0805 package, suitable for applications requiring precise resistance values in compact electronic circuits.

ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Terminal Form: THROUGH-HOLE; Maximum Load Regulation (%): 1.5 %; Operating Temperature (TJ-Min): 0 Cel; Maximum Line Regulation (%/V): .07;

NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Maximum Collector Current (IC): .8 A; Qualification: Not Qualified;

RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;

Infineon BSS123NH6327XTSA1 is a N-CHANNEL FET with 100V DS breakdown voltage, 0.19A ID, and 6 ohm RDS(on). Ideal for small outline applications requiring high drain current and low on-resistance. AEC-Q101 compliant for automotive use.

N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .35 W; Maximum Drain Current (ID): .115 A; Maximum Drain Current (Abs) (ID): .115 A;