DDTC143ZLP-7B by Diodes Incorporated | Transistors

Image shown is a representation only.

Manufacturer	Diodes Incorporated
Manufacturer's Part Number	DDTC143ZLP-7B
Description	NPN; Configuration: SINGLE WITH BUILT-IN RESISTOR; Surface Mount: YES; Nominal Transition Frequency (fT): 250 MHz; Maximum Collector Current (IC): .1 A; Minimum DC Current Gain (hFE): 180;
Datasheet	DDTC143ZLP-7B Datasheet

NAME	DESCRIPTION
Nominal Transition Frequency (fT):	250 MHz
Package Body Material:	PLASTIC/EPOXY
Maximum Collector Current (IC):	.1 A
Maximum Time At Peak Reflow Temperature (s):	30
Configuration:	SINGLE WITH BUILT-IN RESISTOR
Transistor Element Material:	SILICON
Polarity or Channel Type:	NPN
Surface Mount:	YES
Minimum DC Current Gain (hFE):	180
Terminal Finish:	NICKEL PALLADIUM GOLD
JESD-609 Code:	e4
No. of Terminals:	3
Maximum Collector-Emitter Voltage:	50 V
Terminal Position:	BOTTOM
Package Style (Meter):	CHIP CARRIER
JESD-30 Code:	R-PBCC-N3
No. of Elements:	1
Package Shape:	RECTANGULAR
Terminal Form:	NO LEAD
Additional Features:	BUILT IN BIAS RESISTANCE RATIO IS 10
Case Connection:	COLLECTOR
Peak Reflow Temperature (C):	260
Moisture Sensitivity Level (MSL):	1

Popular Products

1N4148WS-7-F by Diodes Inc. is a single rectifier diode with max reverse recovery time of 0.004 us and max reverse current of 1 uA. It operates b/w -65 to 150 °C, ideal for applications requiring small outline surface mount diodes with a max output current of 0.15 A.

NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .8 A; Maximum Operating Temperature: 150 Cel;

MC33269T-3.3G by Onsemi is a fixed positive single output LDO regulator with a max output current of 0.8 A and a dropout voltage of 1.35 V. It is commonly used in applications that require stable voltage regulation, such as power supplies for electronic devices.

RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;

Other Regulators; No. of Terminals: 3; Maximum Input Voltage Absolute: 35 V; Maximum Voltage Tolerance: 5 %; Terminal Position: SINGLE; Operating Temperature (TJ-Min): 0 Cel;

BAV99WT1G by Onsemi is a series connected diode with 0.006 us reverse recovery time. It is a small outline rectifier diode with 70V peak reverse voltage, ideal for surface mount applications in electronics requiring fast switching and low forward voltage drop.

NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Maximum Collector Current (IC): .6 A; Maximum Time At Peak Reflow Temperature (s): 10;

BSS123LT1G by Onsemi is a N-CHANNEL FET with 100V DS breakdown voltage, 0.17A drain current, and 6 ohm on resistance. Ideal for switching applications, it operates in enhancement mode with a max power dissipation of 0.225W. It comes in a small outline package with gull wing terminals and can withstand temperatures from -55 to 150°C.

MBR0520L-T1 by Won-top Electronics is a Schottky rectifier diode with 20V peak reverse voltage and 0.5A output current. It is a single-config, surface-mount diode in a small outline package, suitable for applications requiring high-speed switching and low forward voltage drop. Operating temperature range from -65°C to 125°C makes it ideal for various electronic circuits.

OPA2227UA by Texas Instruments is a dual operational amplifier with low-offset voltage of 200 uV and bias current of 0.01 uA. It operates at temperatures ranging from -40 to 85 °C, making it suitable for industrial applications requiring precise signal amplification. With a unity gain bandwidth of 8000 kHz, this op amp is ideal for high-frequency circuit designs.