ZVN1409DWP by Diodes Incorporated | Transistors

Image shown is a representation only.

Manufacturer	Diodes Incorporated
Manufacturer's Part Number	ZVN1409DWP
Description	N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Field Effect Transistor Technology: METAL-OXIDE SEMICONDUCTOR; Terminal Finish: TIN LEAD; JESD-30 Code: S-XUUC-N2;
Datasheet	ZVN1409DWP Datasheet

NAME	DESCRIPTION
Package Body Material:	UNSPECIFIED
Maximum Time At Peak Reflow Temperature (s):	10
Configuration:	SINGLE
Transistor Element Material:	SILICON
Field Effect Transistor Technology:	METAL-OXIDE SEMICONDUCTOR
Polarity or Channel Type:	N-CHANNEL
Surface Mount:	YES
Terminal Finish:	TIN LEAD
JESD-609 Code:	e0
No. of Terminals:	2
Minimum DS Breakdown Voltage:	90 V
Qualification:	Not Qualified
Terminal Position:	UPPER
Package Style (Meter):	UNCASED CHIP
JESD-30 Code:	S-XUUC-N2
No. of Elements:	1
Package Shape:	SQUARE
Terminal Form:	NO LEAD
Operating Mode:	ENHANCEMENT MODE
Peak Reflow Temperature (C):	235
Maximum Drain-Source On Resistance:	250 ohm

Popular Products

RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;

FTDI's FT232RL-REEL is a bus controller with 28 terminals, operating at 3.3V to 5.25V. It supports USB, VBUS, and UART buses with a data transfer rate of 60MBps. Ideal for industrial applications due to its CMOS technology and compatibility with RS232, RS422, and RS485 standards.

RECTIFIER DIODE; Surface Mount: YES; Technology: SCHOTTKY; No. of Phases: 1; Config: SINGLE; Maximum Operating Temperature: 125 Cel;

OPA2277UA by Texas Instruments is a dual operational amplifier with low-offset voltage of 100 uV and micropower consumption of 1.65 mA. Ideal for industrial applications, it offers high common mode rejection ratio of 140 dB and unity gain bandwidth of 1000 kHz in a small outline package.

LP2950CDT-3.3G by Onsemi is a fixed positive single output LDO regulator with a nominal output voltage of 3.3V and max output current of 0.1A. It has a small outline package style, operates at temperatures ranging from -40 to 125 °C, and is suitable for applications requiring low dropout voltage and precise voltage regulation in electronic circuits.

N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Terminal Finish: TIN LEAD; Package Body Material: PLASTIC/EPOXY;

TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

RECTIFIER DIODE; Terminal Position: END; Terminal Form: NO LEAD; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;

N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .83 W; Package Body Material: PLASTIC/EPOXY; JEDEC-95 Code: TO-236AB;

N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Time At Peak Reflow Temperature (s): NOT SPECIFIED; Minimum DS Breakdown Voltage: 50 V; Maximum Operating Temperature: 150 Cel;