800AWSP9M6RE by E-switch | Switches

Image shown is a representation only.

Manufacturer	E-switch
Manufacturer's Part Number	800AWSP9M6RE
Description	PUSHBUTTON SWITCH; Mounting Feature: THROUGH HOLE-RIGHT ANGLE; Switch Function: SPST; Type (Actuator): PLUNGER; Contact Function: OFF-(ON); Body Length/Diameter: 9.65 mm;
Datasheet	800AWSP9M6RE Datasheet

NAME	DESCRIPTION
Maximum DC Contact Current:	.02 A
Center Contact Plating:	GOLD OVER NICKEL
Center Contact Material:	COPPER ALLOY
Length (Bushing):	.162 inch
Housing Material:	STAINLESS STEEL
Type (Actuator):	PLUNGER
Maximum AC Contact Voltage:	20 V
Terminal Finish:	Gold (Au) - with Nickel (Ni) barrier
Switch Action:	MOMENTARY
Terminal Material:	COPPER ALLOY
Termination Type:	SOLDER
Electrical Life:	50000 Cycle(s)
Maximum Operating Temperature:	85 Cel
Material (Actuator):	GLASS FILLED NYLON/GLASS FILLED POLYSTER
Contact Resistance:	10 mohm
Insulation Resistance:	1000000000 ohm
Maximum AC Contact Current:	.02 A
End Contact Material:	COPPER ALLOY
Angle (Actuator):	0 deg
Maximum DC Contact Voltage:	20 V
DC Maximum Rating R Load (Contact):	0.02A@20VDC
Dielectric Withstand Volts (V):	1000VRMS
Contact Function:	OFF-(ON)
PCB Hole Count:	4
Maximum Operating Force:	2.452 N
Switch Type:	PUSHBUTTON SWITCH
AC Maximum Rating R Load (Contact):	0.02A@20VAC
Sealing:	EPOXY TERMINAL SEALED
JESD-609 Code:	e4
Minimum Operating Temperature:	-30 Cel
Mounting Feature:	THROUGH HOLE-RIGHT ANGLE
Body Width:	8.13 inch
Switch Function:	SPST
Terminal Length:	.13 inch
Length (Actuator):	.232 inch
End Contact Plating:	GOLD OVER NICKEL
Insulator Material:	DIALLYL PHTHALATE
Body Height:	5.08 mm
Body Length/Diameter:	9.65 mm
AC Maximum Power Rating R Load (Contact):	0.4VA@20VAC

Popular Products

NXP Semiconductors' BSS138BKW,115 is a N-CHANNEL FET with 60V DS breakdown voltage and 0.32A ID. Ideal for SWITCHING applications, it features a built-in diode, 1.6 ohm RDS(on), and operates in ENHANCEMENT MODE. Suitable for surface mount with GULL WING terminals, it meets AEC-Q101 standards.

Diodes Inc. BSS138-7-F is a N-channel FET with 50V DS breakdown voltage, 0.2A max drain current, and 3.5 ohm RDS(on). Ideal for switching applications in small outline packages with matte tin finish, operating up to 150°C peak reflow temp.

NPN; Configuration: SINGLE; Surface Mount: NO; Maximum Collector Current (IC): .8 A; Minimum DC Current Gain (hFE): 30; No. of Elements: 1;

RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;

RECTIFIER DIODE; Surface Mount: YES; Maximum Forward Voltage (VF): 1 V; No. of Elements: 1; Maximum Output Current: .2 A; Config: SINGLE;

LM317T/NOPB by Texas Instruments is an adjustable positive single output standard regulator with a max output voltage of 37V and max input-output voltage differential of 40V. It operates in temperatures ranging from 0 to 125°C, making it suitable for various applications requiring precise voltage regulation in electronic circuits. The package style is flange mount with three terminals for easy installation.

RECTIFIER DIODE; Terminal Position: END; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;

SDR0604-101KL by Bourns is a surface mount fixed inductor with a nominal inductance of 100 uH. It is a general purpose inductor suitable for power applications, with a max rated current of 0.52 A and a self-resonance frequency of 9 MHz.

N-CHANNEL AND P-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Maximum Drain-Source On Resistance: 5 ohm; No. of Terminals: 3;

ECS-0.327-12.5-17X-TR by Ecs International is a crystal oscillator with 20 ppm frequency tolerance, 144% stability, and 50000 ohm series resistance. Ideal for applications requiring precise timing in temperature ranges from -40 to 85 °C, such as telecommunications and industrial automation.