TL2201EEZB1CBLK by E-switch | Switches

Image shown is a representation only.

Manufacturer	E-switch
Manufacturer's Part Number	TL2201EEZB1CBLK
Description	PUSHBUTTON SWITCH; Mounting Feature: THROUGH HOLE-STRAIGHT; Switch Function: DPDT; Type (Actuator): PUSHBUTTON; Contact Function: ON-ON; Actuator Travel (mm): 2.4892;
Datasheet	TL2201EEZB1CBLK Datasheet

NAME	DESCRIPTION
Maximum DC Contact Current:	.1 A
Center Contact Plating:	SILVER
Center Contact Material:	PHOSPHOR BRONZE
Housing Material:	POLYBUTYLENE TEREPHTHALATE
Type (Actuator):	PUSHBUTTON
Actuator Travel (mm):	2.4892
Switch Action:	LATCHED
Terminal Material:	COPPER ALLOY
Termination Type:	SOLDER
Electrical Life:	10000 Cycle(s)
Manufacturer Series:	TL2201EEZB1CBLK
Material (Actuator):	ACETAL
Contact Resistance:	50 mohm
Insulation Resistance:	100000000 ohm
End Contact Material:	PHOSPHOR BRONZE
Maximum DC Contact Voltage:	30 V
DC Maximum Rating R Load (Contact):	0.1A@30VDC
Dielectric Withstand Volts (V):	500VAC
Contact Function:	ON-ON
PCB Hole Count:	6
Switch Type:	PUSHBUTTON SWITCH
Mounting Feature:	THROUGH HOLE-STRAIGHT
Body Width:	8.509 inch
Switch Function:	DPDT
Terminal Length:	.138 inch
Length (Actuator):	.461 inch
End Contact Plating:	SILVER
Body Height:	8.509 mm
Body Length/Diameter:	8.509 mm

Popular Products

TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Maximum Clamping Voltage: 29.2 V; Nominal Breakdown Voltage: 21.1 V; Maximum Repetitive Peak Reverse Voltage: 18 V; Polarity: BIDIRECTIONAL;

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

LAN8720AI-CP-TR by Microchip is an Ethernet transceiver with 100 Mbps data rate, operating at -40 to 85 °C. It features a 3.3 V supply voltage, 54 mA supply current, and TS 16949 screening level. Ideal for network interfaces in industrial applications due to its compact square package and low profile design.

RECTIFIER DIODE; Surface Mount: NO; Maximum Operating Temperature: 175 Cel; Maximum Reverse Recovery Time: .004 us; Maximum Non Repetitive Peak Forward Current: .5 A; Maximum Forward Voltage (VF): 1 V;

N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Maximum Time At Peak Reflow Temperature (s): 30; Field Effect Transistor Technology: METAL-OXIDE SEMICONDUCTOR;

SMMBT3904LT1G by Onsemi is a NPN BJT with 3 terminals, 0.3W power dissipation, and 40V max collector-emitter voltage. Ideal for small outline applications requiring a transistor with hFE of at least 30, it operates up to 150°C and has a transition frequency of 300MHz.

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .3 W; Maximum Drain Current (ID): .115 A; Maximum Drain-Source On Resistance: 7.5 ohm;

NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .8 A; JESD-30 Code: O-MBCY-W3;

KEMET C1210C104K5RACTU is a ceramic capacitor with 0.1uF capacitance, rated for 50V. It has X7R temperature characteristics and ±10% tolerance, suitable for surface mount applications in a wide temperature range from -55°C to 125°C. Its compact rectangular package makes it ideal for various electronic devices.