Eaton Corporation - ACE1V3225-510-R

The TDK MPZ1608B471AT is a 0603 chip bead data line filter with 2 terminals. It operates b/w -55°C to 125°C, has a DC resistance of 0.15 ohm, and an output impedance of 470 ohm. Ideal for surface mount applications in electronic devices requiring noise suppression at frequencies up to 100 MHz.

TDK MMZ1608B102CTA00 is a chip bead data line filter with 2 terminals. It offers a max DC resistance of 0.6 ohm and an output impedance of 1000 ohm. Ideal for surface mount applications, it operates b/w -55 to 125 °C and has a rated current of 0.3 A.

Wurth Elektronik 742792603 is a multi-layer FERRITE CHIP filter with 2 terminals, suitable for data line applications. It operates b/w -55 to 125 °C, with a frequency range of 100-1000 MHz and DC resistance of 0.03 ohm. This surface mount component has dimensions of L1.6xB0.8xH0.8 mm and rated current of 4A, ideal for noise suppression in electronic circuits.

BLM15HB121SN1D by Murata Manufacturing is a chip bead data line filter with 1 function and 2 terminals. It has a max operating temperature of 125°C and a min operating temperature of -55°C. This filter is commonly used in applications requiring noise suppression in data lines, with dimensions of L1.0XB0.5XH0.5 (mm) and a rated current of 0.3 A.

Wurth Elektronik 744228 Data Line Filter has UL approval, rated voltage of 80V, and inductance of 25uH. With dimensions L9.2XB6.0XH5.0 (mm), it is ideal for noise filtering in data transmission applications with a max operating temperature of 125°C.

TDK MMZ1608S400ATA00 is a 0603 chip bead filter with 2 terminals. It offers max operating temp of 125°C, min of -55°C, and DC resistance of 0.1 ohm. Ideal for data line filtering applications due to its compact size (L1.6xB0.8xH0.8 mm) and output impedance of 40 ohm at rated current of 0.6 A.

The Bourns 7116 is a data line filter with two functions. It has a maximum operating temperature of 105°C and a minimum operating temperature of -55°C. The inductance is 8000 uH and the maximum DC resistance is 0.2 ohm. It is a through-hole mount and rated for a current of 2 A.

Murata's BLM18SG221TN1D is a chip bead data line filter with 2 terminals, operating b/w -55°C to 125°C. It offers a max DC resistance of 0.04 ohm and output impedance of 220 ohm at frequencies ranging from 100 MHz. This ferrite chip filter, measuring L1.6xB0.8xH0.5 mm, is ideal for surface mount applications in electronic circuits requiring noise suppression and signal filtering capabilities.

Murata Manufacturing's BLM15HD182SN1D is a chip bead data line filter with 2 terminals, rated for 0.2A current. With dimensions of L1.0xB0.5xH0.5 (mm), it operates b/w -55 to 125°C and offers an output impedance of 1800 ohm. Ideal for surface mount applications, this ferrite chip filter has a frequency range from 100MHz to 1000MHz.

TE Connectivity's BMB2A1000LN2 is an 0805 multilayer chip data line filter with a max operating temperature of 125°C and min frequency of 100 MHz. With a DC resistance of 0.3 ohm, it has an output impedance of 1000 OHM and rated current of 0.35 A. Ideal for surface mount applications, this ferrite chip filter is commonly used in electronic devices requiring noise suppression on data lines.

DLW5BTN501SQ2L by Murata Mfg is a Data Line Filter with 4 terminals, rated for 50V and 4A. It offers 10 Mohm min insulation resistance, operates b/w -40 to 85 °C, and has a max DC resistance of 0.019 ohm. Ideal for applications requiring output impedance of 500 OHM in surface mount configurations.

Bourns SRF2012A-900YA is a data line filter with 2 functions, rated at 50V. It offers a max operating temperature of 125°C and min insulation resistance of 10 Mohm. Ideal for applications requiring surface mount filters with dimensions of L2.0xB1.2xH1.2 (mm).

Taiyo Yuden's FBMJ3216HS800-T8 is a Ferrite Chip Data Line Filter with 2 terminals, rated for 4A current. It offers an output impedance of 80 ohms, operates b/w -40°C to 125°C, and has a compact size of 3.2mm x 1.6mm x 1.1mm. Ideal for surface mount applications requiring effective noise suppression in data lines.

Murata Manufacturing's BLM18BA100SN1D is a chip bead data line filter with 2 terminals, operating b/w -55 to 125°C. With dimensions of 1.6x0.8x0.8mm, it offers a max frequency of 100MHz and DC resistance of 0.25 ohm. Ideal for surface mount applications, it provides an output impedance of 10 ohm and rated current of 0.5A in filtering data lines at frequencies above 100MHz.

Murata Manufacturing's BLM18EG221SN1B is a chip bead data line filter with 2 terminals, operating b/w -55 to 125°C. With dimensions of 1.6x0.8x0.8mm, it offers a DC resistance of 0.05 ohm and output impedance of 260 ohm for frequencies ranging from 100 MHz to 1000 MHz. Ideal for surface mount applications, this ferrite chip filter has a rated current of 2A and is commonly used in electronic devices requiring noise suppression on data lines.

DATA LINE FILTER; Maximum DC Resistance: .01 ohm; Rated Current: 10 A; Rated Voltage: 200 V; No. of Functions: 1; Additional Features: PI-TYPE CIRCUIT;

Murata Manufacturing's BLM18SG121TN1D is a chip bead data line filter with 2 terminals, rated for 3A current. It operates b/w -55°C to 125°C, offering 120 ohm output impedance at 100MHz frequency. Ideal for surface mount applications requiring effective filtering in compact spaces.

Murata Manufacturing's NFL21SP206X1C7D is a 3-terminal data line filter with 1000 Mohm insulation resistance and 16V rated voltage. With inductance of 0.7uH, it operates b/w -55 to 125 °C, ideal for surface mount applications requiring capacitance of 240uF.

TDK's ACM2012-361-2P-T002 is a FERRITE CHIP filter with 2 functions, rated at 50V and 0.22A. With dimensions of L2.0XB1.2XH1.3 (mm), it offers insulation resistance of 10 Mohm for data line applications in temperatures ranging from -40 to 85 °C.

NUF4001MUT2G by Onsemi is a 4-function data line filter with 25 dB attenuation at 800 MHz. It operates b/w -40 to 85 °C and has a max DC resistance of 115 ohm. Ideal for applications requiring noise filtering in data lines, it comes in a compact surface mount package measuring L1.8xB1.2xH0.55 mm.