Eaton Corporation - ACE1V4532-510-R

Murata Manufacturing's BLM21BB121SN1D is an 0805 chip bead filter with 2 terminals, operating b/w -55 to 125 °C. With a max frequency of 100 MHz and DC resistance of 0.19 ohm, it offers output impedance of 120 OHM. Ideal for data line filtering applications due to its compact size and ferrite material construction.

MMZ2012Y152BT000 by TDK is an 0805 chip bead data line filter with a max operating temperature of 125°C and min of -55°C. It has a max DC resistance of 0.4 ohm, output impedance of 1500 ohm, and rated current of 0.5 A. Ideal for surface mount applications in electronic devices requiring noise suppression and signal filtering capabilities.

Murata Manufacturing's BLM31PG601SN1B is a chip bead data line filter with 2 terminals, rated for 1.5A current and 600 ohm output impedance. It operates b/w -55°C to 125°C, suitable for applications requiring noise suppression in the frequency range of 100 MHz.

TPD8F003DQDR by Texas Instruments is a data line filter with 8 functions and 16 terminals. It operates b/w -40°C to 85°C, with a max DC resistance of 115 ohm. This surface mount device is ideal for IEC-approved applications requiring high capacitance and compact dimensions.

HI0805R800R-10 by Laird Technologies is a chip bead data line filter with 80 OHM output impedance. It operates b/w -40 to 125 °C, suitable for frequencies ranging from 25 MHz to 1000 MHz. With dimensions of L2.0XB1.25XH0.9 (mm), it is ideal for surface mount applications in various electronic devices.

World Products' HH-1M1608-121JT is a FERRITE CHIP filter with 2 terminals, 0.8mm width, and 0.15 ohm DC resistance. Ideal for data line applications, it offers an output impedance of 120 OHM, rated current of 0.5 A, and surface mounting type.

Pulse Electronics P0354NLT is a data line filter with 2 functions, AEC-Q200 screening level, and inductance of 1170 uH. It operates b/w -40 to 120 °C and has a max DC resistance of 0.2 ohm. Ideal for surface mount applications, it offers a rated current of 1.22 A in compact dimensions of L12.7xB12.7xH5.46 mm, making it suitable for various electronic devices requiring noise filtering on data lines.

Murata Manufacturing's NFE61PT472C1H9L is a 3-terminal data line filter with 1000 Mohm insulation resistance, 50V rated voltage, and 4700uF capacitance. It operates b/w -25°C to 85°C and is ideal for surface mount applications requiring noise filtering in data lines.

TDK's ACP3225-102-2P-TL000 is a 2-function data line filter with 60V rated voltage and 1.2A current. With dimensions of L3.2xB2.5xH1.9 mm, it operates b/w -25 to 85 °C, ideal for surface mount applications in various electronic devices.

DATA LINE FILTER; Rated Current: 10 A; Maximum Operating Temperature: 85 Cel; Inductance: .1 uH; Capacitance: 4000 uF; Length: 8 mm;

The Murata Manufacturing NFL21SP106X1C3D is a data line filter with 1000 Mohm insulation resistance, 16V rated voltage, and 0.68 uH inductance. It is suitable for applications requiring noise suppression in data lines, offering a compact size of L2.0XB1.25XH0.85 (mm) and surface mounting type.

Murata Manufacturing's BLM03AX241SN1D is a chip bead data line filter with 2 terminals, operating b/w -55 to 125 °C. It offers a DC resistance of 0.38 ohm, output impedance of 240 OHM, and rated current of 0.35 A. Ideal for surface mount applications in filtering frequencies up to 100 MHz.

Murata Manufacturing's BLM31PG601SN1 is a FERRITE CHIP filter with 2 terminals, rated for 1.5A current and 600Ω output impedance. With dimensions of L3.2xB1.6xH1.1 mm, it operates b/w -55°C to 125°C, ideal for data line filtering in surface mount applications.

Wurth Elektronik 744220203 is a Data Line Filter with 2 functions and rated voltage of 80V. It has inductance of 20000uH, max operating temp of 125°C, and DC resistance of 2.6 ohm. Ideal for applications requiring noise suppression in data lines with approval from IEC standards.

DATA LINE FILTER; Maximum DC Resistance: .6 ohm; Dimensions: L10.16XB5.08XH8.89 (mm)/L0.4XB0.2XH0.35 (inch); Width (mm): 5.08; Height: 8.89 mm; Length: 10.16 mm;

Murata Manufacturing's BLM18KG221SH1D is a FERRITE CHIP filter with 220 OHM output impedance, 1.5A rated current, and -55 to 125 °C operating temperature range. It is ideal for data line filtering applications due to its AEC-Q200 screening level and surface mounting type.

Murata Manufacturing's BLM15BB121SN1D is a chip bead data line filter with 2 terminals, operating b/w -55 to 125 °C. With dimensions of L1.0XB0.5XH0.5 (mm), it offers a max frequency of 100 MHz and output impedance of 120 OHM. Ideal for surface mount applications, this ferrite chip filter has a rated current of 0.3 A and DC resistance of 0.55 ohm, making it suitable for noise suppression in electronic circuits.

Murata Manufacturing's BLM18BB221SN1D is a chip bead data line filter with 2 terminals, rated for 0.45A current and 220Ω output impedance. With dimensions of 1.6x0.8x0.8mm, it operates b/w -55°C to 125°C, suitable for surface mount applications in filtering frequencies from 100MHz with a max DC resistance of 0.45Ω.

Murata Manufacturing's BLM18PG471SZ1D is a FERRITE CHIP filter with 470 OHM output impedance, suitable for data line filtering applications. With AEC-Q200 screening and 1A rated current, it operates b/w -55 to 125 °C, making it ideal for automotive electronics. This surface mount chip has 2 terminals, measures 1.6mm in length and 0.8mm in width, with a max DC resistance of 0.2 ohm.

Pulse Electronics P0353NLT is a data line filter with 2 functions, AEC-Q200 screening level, and inductance of 590uH. It operates b/w -40°C to 120°C, has a max DC resistance of 0.021 ohm, and rated current of 5.6A. Ideal for surface mount applications requiring effective filtering in compact spaces.