RA-12W-K by Fujitsu Semiconductor America | Relays

Image shown is a representation only.

Manufacturer	Fujitsu Semiconductor America
Manufacturer's Part Number	RA-12W-K
Description	POWER/SIGNAL RELAY; Mounting Feature: THROUGH HOLE-STRAIGHT MOUNT; Relay Action: MOMENTARY; Relay Function: DPDT; Coil or Input Supply Type: DC; Reference Standard: CSA; UL;
Datasheet	RA-12W-K Datasheet

NAME	DESCRIPTION
Relay Function:	DPDT
DC Coil Release Voltage:	1.2 V
Maximum AC Contact Voltage:	120 V
Contact or Output Supply Type:	AC
Terminal Finish:	Tin/Silver/Copper
Relay Type:	Power/Signal Relay
Coil or Input Supply Type:	DC
Termination Type:	Solder
Operate Time:	6 ms
Electrical Life:	200000 Cycle(s)
DC Coil Operate Voltage:	8.1 V
Release Time:	4 ms
Maximum Operating Temperature:	85 °C (185 °F)
Maximum DC Coil Current:	13 mA
Maximum AC Contact Current:	500 mA
Coil Resistance:	960 Ω
JESD-609 Code:	e1
Minimum Operating Temperature:	-40 °C (-40 °F)
Mounting Feature:	Through Hole-Straight Mount
Relay Action:	Momentary
Body Width:	10 in (254 mm)
Maximum DC Coil Voltage:	12 V
Physical Dimension:	0.789 x 0.394 x 0.39 in (20.05 x 10 x 9.9 mm)
Body Height:	0.39 in (9.9 mm)
Body Length/Diameter:	0.789 in (20.05 mm)
Reference Standard:	CSA; UL
Coil Power (mW):	150 mW
Maximum Contact AC Rating (R Load):	0.5A@120VAC

Popular Products

D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Body Length: 1.228 inch; Mounting Type: CABLE AND PANEL; Termination Type: CRIMP;

NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .8 A; Maximum Operating Temperature: 150 Cel;

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

FTDI's FT232RL-REEL is a bus controller with 28 terminals, operating at 3.3V to 5.25V. It supports USB, VBUS, and UART buses with a data transfer rate of 60MBps. Ideal for industrial applications due to its CMOS technology and compatibility with RS232, RS422, and RS485 standards.

FDD5614P by Onsemi is a P-CHANNEL Power FET with 60V DS Breakdown Voltage, ideal for SWITCHING applications. It features 45A IDM and 0.1 ohm RDS(ON), operating in ENHANCEMENT MODE at up to 175°C. The PLASTIC/EPOXY package with GULL WING terminals ensures efficient heat dissipation and reliable performance.

Abracon ABS07-32.768KHZ-T crystal oscillator offers 20 ppm frequency tolerance, 144% stability, and 70000 ohm series resistance. Ideal for applications requiring 0.032768 MHz frequency precision in a compact surface-mount design with gold over nickel finish.

TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .35 W; Maximum Drain Current (ID): .2 A; Transistor Application: SWITCHING;

BSS138-TP by Micro Commercial Components is a N-channel small signal FET with a min DS breakdown voltage of 50V and max drain current of 0.22A. It is commonly used in applications requiring enhancement mode operation, such as power management and switching circuits.

BSS138NH6327XTSA2 by Infineon is a N-CHANNEL FET with 60V DS Breakdown Voltage, ideal for small signal applications. Operating in Enhancement Mode, it has 0.36W Power Dissipation and 3.5 ohm Drain-Source Resistance. With Gull Wing terminals and AEC-Q101 reference standard, it's suitable for automotive electronics due to its high temperature range of -55 to 150 °C.