Image shown is a representation only.
| Manufacturer | Fujitsu |
|---|---|
| Manufacturer's Part Number | RA4-24W-K |
| Description | POWER/SIGNAL RELAY; Relay Action: LATCHED; Relay Function: 4PDT; Coil or Input Supply Type: DC; Reference Standard: CSA; UL; Coil Power (mW): 200; |
| Datasheet | RA4-24W-K Datasheet |
| NAME | DESCRIPTION |
|---|---|
| Nominal Coil Voltage: | 24 V |
| Maximum Contact AC Power Rating (R Load): | 60VA@250VAC |
| Maximum DC Contact Current: | 2 A |
| Relay Function: | 4PDT |
| DC Coil Release Voltage: | 2.4 V |
| Maximum AC Contact Voltage: | 250 V |
| Dielectric Strength Between Open Contacts: | 1.5 kVrms |
| Contact or Output Supply Type: | AC/DC |
| Maximum Contact DC Rating (R Load): | 2A@220VDC |
| Relay Type: | Power/Signal Relay |
| No. of Terminals: | 14 |
| Coil or Input Supply Type: | DC |
| Relay Form: | 4 Form C |
| Termination Type: | Solder |
| Operate Time: | 6 ms |
| Electrical Life: | 200000 Cycle(s) |
| DC Coil Operate Voltage: | 16.8 V |
| Release Time: | 4 ms |
| Manufacturer Series: | RA4 |
| Maximum Operating Temperature: | 80 °C (176 °F) |
| Contact Resistance: | 100 mΩ |
| Insulation Resistance: | 1 GΩ |
| Input Switching Control Type: | Random |
| Maximum AC Contact Current: | 2 A |
| End Contact Material: | Silver Palladium |
| Maximum DC Contact Voltage: | 220 V |
| PCB Hole Count: | 14 |
| Maximum Contact DC Power Rating (R Load): | 24W@220VDC |
| Coil Resistance: | 2.88 kΩ |
| Sealing: | Plastic Sealed |
| Minimum Operating Temperature: | -40 °C (-40 °F) |
| Weight: | 6.4 g |
| Relay Action: | Latched |
| Body Width: | 10 in (254 mm) |
| Dielectric Strength Between Coil & Contacts: | 1.5 kVrms |
| Terminal Length: | 0.1299 in (3.299 mm) |
| End Contact Plating: | Gold |
| Physical Dimension: | 1.387 x 0.394 x 0.39 in (35.24 x 10 x 9.9 mm) |
| Body Height: | 0.39 in (9.9 mm) |
| Body Length/Diameter: | 1.387 in (35.24 mm) |
| Reference Standard: | CSA; UL |
| Coil Power (mW): | 200 mW |
| Maximum Contact AC Rating (R Load): | 2A@250VAC |
