1SE401-3 by Honeywell Sensing And Control | Switches

Image shown is a representation only.

Manufacturer	Honeywell Sensing And Control
Manufacturer's Part Number	1SE401-3
Description	SNAP ACTING/LIMIT SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: SPDT; Type (Actuator): STEEL PLUNGER; Sealing: CORROSION PROOF; EPOXY TERMINAL SEALED; Switch Action: MOMENTARY;
Datasheet	1SE401-3 Datasheet

NAME	DESCRIPTION
Maximum DC Contact Current:	1 A
Maximum DC Contact Voltage:	30 V
DC Maximum Rating R Load (Contact):	1A@30VDC
Maximum Operating Force:	4.73 N
Type (Actuator):	STEEL PLUNGER
Switch Type:	SNAP ACTING/LIMIT SWITCH
Maximum Pre Travel:	1.27 mm
Sealing:	CORROSION PROOF; EPOXY TERMINAL SEALED
Mounting Feature:	PANEL MOUNT
Actuator Travel (mm):	1.35
Body Width:	8.79 inch
Switch Action:	MOMENTARY
Switch Function:	SPDT
Termination Type:	WIRE
Body Height:	15.24 mm
Body Length/Diameter:	22.25 mm
Manufacturer Series:	1SE401-3

Popular Products

RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;

U.FL-R-SMT-1(10) by Hirose Electric is a RF connector with 50 ohm impedance, 0.05 dB insertion loss, and 8 GHz operating frequency. Ideal for board mounting in commercial applications, it features gold termination finish, liquid crystal polymer insulator, and 200VAC dielectric voltage resistance.

LM317T by Texas Instruments is an adjustable positive single output standard regulator with a max output voltage of 37V and max input-output voltage differential of 40V. Operating temperature ranges from 0 to 125°C, making it suitable for various applications requiring precise voltage regulation in electronic circuits. With a max output current of 1.5A, this through-hole package regulator is ideal for power supply designs where adjustable voltage levels are needed.

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

RK73H2ATTD10R0F by Koa Speer Electronics is a 0805 SMT fixed resistor with 10 ohm resistance, 1% tolerance, and 0.25 W power dissipation. Ideal for surface mount applications in automotive electronics due to its AEC-Q200 reference standard and operating voltage of 150 V.

TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

TEMPERATURE SENSOR,SWITCH/DIGITAL OUTPUT,SERIAL; Mounting Feature: SURFACE MOUNT; No. of Terminals: 8; Package Shape or Style: SQUARE; Housing: PLASTIC; Minimum Supply Voltage: 3 V;

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

N-CHANNEL AND P-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Maximum Drain-Source On Resistance: 5 ohm; No. of Terminals: 3;