4HS4-118 by Honeywell Sensing And Control | Switches

Image shown is a representation only.

Manufacturer	Honeywell Sensing And Control
Manufacturer's Part Number	4HS4-118
Description	SNAP ACTING/LIMIT SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: SPDT; Termination Type: WIRE; Maximum AC Contact Voltage: 125 V; Maximum AC Contact Current: 15 A;
Datasheet	4HS4-118 Datasheet

NAME	DESCRIPTION
Maximum DC Contact Current:	15 A
Maximum DC Contact Voltage:	28 V
DC Maximum Rating R Load (Contact):	15A@28VDC
Maximum Operating Force:	6.12 N
Switch Type:	SNAP ACTING/LIMIT SWITCH
Maximum AC Contact Voltage:	125 V
Maximum Pre Travel:	1.65 mm
AC Maximum Rating R Load (Contact):	15A@125VAC
Sealing:	EPOXY TERMINAL SEALED
Mounting Feature:	PANEL MOUNT
Actuator Travel (mm):	1.9
Body Width:	17.02 inch
Switch Action:	MOMENTARY
Switch Function:	SPDT
Termination Type:	WIRE
Body Height:	21.84 mm
Body Length/Diameter:	45.21 mm
Maximum AC Contact Current:	15 A

Popular Products

NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .8 A; Maximum Operating Temperature: 150 Cel;

LIS3DHTR by STMicroelectronics is a 16-terminal accelerometer with output range of 0.18-1.62V, ideal for motion sensing applications. Operating temperature ranges from -40 to 85°C, making it suitable for various environments. With a compact square package body of 3x3mm and digital voltage output type, it is commonly used in surface mount designs.

STMicroelectronics LD1117S33CTR is a fixed positive single output LDO regulator with a nominal output voltage of 3.3V and max output current of 1.3A. It operates within an input voltage range of 4.75V to 15V, making it suitable for various applications requiring stable voltage regulation in compact designs. The device features low dropout voltage of 1.3V, high temperature operation up to 125°C, and small outline package style for space-constrained PCB layouts.

TE Connectivity's M39029/58-360 is a CRIMP terminal backshell for 22-28 AWG wires, rated at 5A. Ideal for male contacts in Mil-Spec applications, it offers a cross-section area of 0.34 mm2 and ensures secure connections in demanding environments.

MMBT3904LT1G by Onsemi is a NPN BJT with max. collector-emitter voltage of 40V, hFE of 30, and fT of 300MHz. Ideal for small signal applications in electronics due to its compact size, high transition frequency, and low power dissipation capabilities.

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;

FIXED RESISTOR; Mounting Type: SURFACE MOUNT; Resistance: 10000 ohm; Rated Power Dissipation (P): .125 W; Maximum Operating Temperature: 125 Cel; Tolerance: 1 %;

The Onsemi FDV304P is a P-CHANNEL FET with 25V DS Breakdown Voltage, ideal for SWITCHING applications. It features a max Drain Current of 0.46A and an Operating Temperature range of -55 to 150 °C. The transistor comes in a PLASTIC/EPOXY package with GULL WING terminals, suitable for surface mount configurations.

FIXED POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Terminal Form: THROUGH-HOLE; Maximum Voltage Tolerance: 5 %; Operating Temperature (TJ-Max): 125 Cel; Maximum Output Voltage-1: 5.25 V;