Honeywell Sensing And Control - BA-2R-A2

BA-2R-A2 by Honeywell Sensing And Control

Image shown is a representation only.

Manufacturer	Honeywell Sensing And Control
Manufacturer's Part Number	BA-2R-A2
Description	SNAP ACTING/LIMIT SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: SPDT; Type (Actuator): PIN PLUNGER; Maximum Operating Temperature: 125 Cel; Body Width: 17.5 inch;
Datasheet	BA-2R-A2 Datasheet

BA-2R-A2 Technical Details

NAME	DESCRIPTION
Maximum Operating Force:	6.12 N
Type (Actuator):	PIN PLUNGER
Switch Type:	SNAP ACTING/LIMIT SWITCH
Maximum AC Contact Voltage:	125 V
Maximum Pre Travel:	1.27 mm
AC Maximum Rating R Load (Contact):	20A@125VAC
Minimum Operating Temperature:	-55 Cel
Mounting Feature:	PANEL MOUNT
Actuator Travel (mm):	1.52
Body Width:	17.5 inch
Switch Action:	MOMENTARY
Switch Function:	SPDT
Termination Type:	SCREW
Body Height:	24.1 mm
Body Length/Diameter:	49.3 mm
Maximum Operating Temperature:	125 Cel
Maximum AC Contact Current:	20 A

Popular Products

FT232RL-TUBE

FTDI

FTDI's FT232RL-TUBE is a bus controller with 28 terminals, operating at 3.3-5.25V. It supports USB, VBUS, and UART interfaces with a data transfer rate of 60MBps. Ideal for industrial applications requiring RS232/RS422/RS485 compatibility in compact designs due to its small outline package style.

SMBJ18CA

Littelfuse

TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

MMBT3906LT1G

Onsemi

MMBT3906LT1G by Onsemi is a PNP BJT with VCEsat of 0.4V, hFE of 30, and fT of 250MHz. Ideal for small signal applications in electronics due to its low power dissipation, high transition frequency, and compact SOT-23 package. Suitable for use in temperature-sensitive environments with an operating range from -65°C to 150°C.

BSS138W-7-F

Diodes Incorporated

Diodes Inc.'s BSS138W-7-F is a N-channel FET with 50V DS breakdown voltage, ideal for switching applications. It features single configuration with built-in diode, Gull Wing terminals, and operates in enhancement mode. With 0.2A max drain current and 3.5 ohm RDS(on), it's UL recognized and suitable for small outline packages at temperatures ranging from -55 to 150°C.

BAV99

Siemens

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;

1N4148

Rfe International

RECTIFIER DIODE; Surface Mount: NO; No. of Elements: 1; Maximum Repetitive Peak Reverse Voltage: 100 V; Maximum Forward Voltage (VF): 1 V; Config: SINGLE;

2N7002

Silicon Standard

N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: NO; Maximum Power Dissipation (Abs): .225 W; Maximum Drain-Source On Resistance: 7.5 ohm; Transistor Element Material: SILICON;

2N2222A

Electronic Transistors

NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;

U.FL-R-SMT-1(10)

Hirose Electric

U.FL-R-SMT-1(10) by Hirose Electric is a RF connector with 50 ohm impedance, 0.05 dB insertion loss, and 8 GHz operating frequency. Ideal for board mounting in commercial applications, it features gold termination finish, liquid crystal polymer insulator, and 200VAC dielectric voltage resistance.

1N4148

Compensated Devices

RECTIFIER DIODE; Terminal Position: UPPER; Terminal Form: NO LEAD; No. of Terminals: 1; Surface Mount: YES; Package Shape: SQUARE;

Category Top Products