EX-AR30 by Honeywell Sensing And Control | Switches

Image shown is a representation only.

Manufacturer	Honeywell Sensing And Control
Manufacturer's Part Number	EX-AR30
Description	SNAP ACTING/LIMIT SWITCH; Mounting Feature: PANEL MOUNT-THREADED; Switch Function: SPDT; Type (Actuator): ROLLER LEVER; Body Width: 65.02 inch; Maximum DC Contact Current: .5 A;
Datasheet	EX-AR30 Datasheet

NAME	DESCRIPTION
Other Names:	EXAR30 EX-AR30-ND Q5135288 480-3717
Maximum DC Contact Current:	.5 A
Maximum DC Contact Voltage:	125 V
DC Maximum Rating R Load (Contact):	.5A@125VDC
Maximum Operating Force:	11.12 N
Type (Actuator):	ROLLER LEVER
Switch Type:	SNAP ACTING/LIMIT SWITCH
Maximum AC Contact Voltage:	480 V
Maximum Pre Travel:	2.65 mm
AC Maximum Rating R Load (Contact):	15A@480VAC
Sealing:	EXPLOSION PROOF
Minimum Operating Temperature:	-40 Cel
Mounting Feature:	PANEL MOUNT-THREADED
Actuator Travel (mm):	2.65
Body Width:	65.02 inch
Switch Action:	MOMENTARY
Switch Function:	SPDT
Termination Type:	SCREW
Body Height:	51.18 mm
Body Length/Diameter:	93.47 mm
Maximum Operating Temperature:	71 Cel
Manufacturer Series:	EX-AR30
Maximum AC Contact Current:	15 A

Popular Products

MBR0540T1G by Onsemi is a Schottky rectifier diode with max. forward voltage of 0.62V and max. output current of 0.5A, ideal for applications requiring high efficiency power conversion in small outline packages. Operating temp range: -55 to 150°C, with peak reflow temp at 260°C, making it suitable for various electronic devices needing reliable rectification performance in compact designs.

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Vishay Intertechnology's SMBJ18CA is a bidirectional TRANS VOLTAGE SUPPRESSOR DIODE with a max clamping voltage of 29.2 V and a breakdown voltage of 21.05 V. It is surface mountable and commonly used in transient suppression applications.

AB26TRB-32.768KHZ--T by Abracon is a crystal oscillator with 20 ppm frequency tolerance, 126% stability, and 35000 ohm series resistance. Ideal for applications requiring 0.032768 MHz nominal frequency in surface mount configurations.

RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;

OPA2227UA by Texas Instruments is a dual operational amplifier with low-offset voltage of 200 uV and bias current of 0.01 uA. It operates at temperatures ranging from -40 to 85 °C, making it suitable for industrial applications requiring precise signal amplification. With a unity gain bandwidth of 8000 kHz, this op amp is ideal for high-frequency circuit designs.

PULSE; RECTANGULAR; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Shape: RECTANGULAR; Surface Mount: NO; No. of Functions: 1;

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;

N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .35 W; Maximum Time At Peak Reflow Temperature (s): 10; Terminal Finish: MATTE TIN;